Hürlimann D 80 SSK vs Nuffield M-3
9 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (27%); they were not built in overlapping years (1956–1958; 1948–1954). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D 80 SSK | M-3 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.4 hp | 38.0 hp | — |
| Engine declared | Hürlimann D-80 | MORRIS-COMMERCIAL 38 T/V/T | differs |
| Displacement declared | 2.36 L | 3.77 L | +60% M-3 |
| Maximum torque declared | — | 138 lb·ft · 187 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 17.4 mph · 28 km/h | +40% M-3 |
| Hydraulics & hitch | |||
| Pump flow declared | — | 7.2 gpm · 27.3 L/min | — |
| Pressure declared | 640 psi · 44 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,805 lb · 1,726 kg | 4,848 lb · 2,199 kg | +27% M-3 |
| Wheelbase declared | 71.3 in · 1,810 mm | 83.0 in · 2,108 mm | +16% M-3 |
| Length declared | 115.2 in · 2,925 mm | 126.0 in · 3,200 mm | +9% M-3 |
| Width declared | 63.0 in · 1,600 mm | 80.0 in · 2,032 mm | +27% M-3 |
| Height declared | 64.3 in · 1,633 mm | 61.5 in · 1,562 mm | — |
| Ground clearance declared | 16.1 in · 410 mm | 23.0 in · 584 mm | +42% M-3 |
| Turning radius, braked declared | 8.9 ft · 2.70 m | — | — |
| Fuel tank declared | 41.2 qt · 39 L | 76.8 qt · 72.7 L | +86% M-3 |
Hürlimann D 80 SSK sources
Source
- Source: Traktorenlexikon, “Hürlimann D 80 SSK”
- Source: Traktorenlexikon, “Hürlimann D 80”
Nuffield M-3 sources
Source
- Source: Traktorenlexikon, “Nuffield Universal M 3 (1948-1957)”
- Source: Traktorenlexikon, “Nuffield Universal M 4 / TVO (1948-1954”