7 material differences · fewer than 12
Tractor oneHürlimann D-70 Super-Spezial1958–1966No measured PTO figureTractor twoSAME Minitauro 501967–1972No measured PTO figure
Which should you choose?
Read our verdict on the D-70 Super-Spezial and the Minitauro 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D-70 Super-Spezial | Minitauro 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 42.4 hp | 47.3 hp | +12% Minitauro 50 |
| Engine declared | Hürlimann D-70 DS | SAME DA 029-953 L | differs |
| Displacement declared | 2.65 L | 2.55 L | — |
| Maximum torque declared | 115 lb·ft · 156 N·m | 116 lb·ft · 157 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% Minitauro 50 |
| Clutch declared | — | Pedal operated dry two-stage double clutch with coil springs | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.3 gpm · 16.1 L/min | — |
| Pressure declared | 640 psi · 44 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,373 lb · 1,530 kg | 3,858 lb · 1,750 kg | +14% Minitauro 50 |
| Wheelbase declared | 67.3 in · 1,710 mm | 77.6 in · 1,970 mm | +15% Minitauro 50 |
| Length declared | 113.4 in · 2,880 mm | 128.7 in · 3,270 mm | +14% Minitauro 50 |
| Width declared | 64.2 in · 1,630 mm | 60.2–87.8 in · 1,530–2,230 mm | differs |
| Ground clearance declared | 12.8 in · 325 mm | 13.4 in · 340 mm | — |
| Turning radius, braked declared | 7.8 ft · 2.38 m | 9.6 ft · 2.94 m | +24% Minitauro 50 |
| Fuel tank declared | — | 52.8 qt · 50.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D-70 Super-Spezial sources
- Source: Traktorenlexikon, “Hürlimann D 70 SSP”
SAME Minitauro 50 sources
- Source: Traktorenlexikon, “SAME Minitauro 50”