Hürlimann D-600 vs International Harvester 504
8 material differences · fewer than 12
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (90%); they were not built in overlapping years (1951–1954; 1961–1968). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | D-600 | 504 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 68.3 hp | 45.3 hp | +51% D-600 |
| Engine declared | Hürlimann D-300 | INTERNATIONAL HARVESTER C-153 | differs |
| Displacement declared | 5.52 L | 2.49 L | +121% D-600 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 18.6 mph · 30 km/h | +50% 504 |
| Clutch declared | Pedal operated dry single plate clutch | pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 12.0 gpm · 45.5 L/min | — |
| Pressure declared | 498 psi · 34 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,488 lb · 3,850 kg | 4,458 lb · 2,022 kg | +90% D-600 |
| Wheelbase declared | — | 73.0 in · 1,854 mm | — |
| Length declared | 143.7 in · 3,650 mm | 132.8 in · 3,372 mm | +8% D-600 |
| Width declared | 74.8 in · 1,900 mm | 83.0 in · 2,108 mm | +11% 504 |
| Height declared | 77.6 in · 1,970 mm | 78.0 in · 1,981 mm | — |
| Ground clearance declared | 16.9 in · 430 mm | — | — |
| Turning radius, braked declared | 10.7 ft · 3.25 m | — | — |
| Fuel tank declared | 116.2 qt · 110 L | 90.0 qt · 85.2 L | +29% D-600 |
Hürlimann D-600 sources
Source
- Source: Traktorenlexikon, “Hürlimann D 600”
- Source: Traktorenlexikon, “Hürlimann D 300”
International Harvester 504 sources
Source
- Source: Traktorenlexikon, “IHC 504”
- Source: Traktorenlexikon, “McCormick Farmall-H”