Hürlimann D-550 Hydrostat or SOMECA 1380 (TD)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the D-550 Hydrostat has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SOMECA 1380 (TD) suits loader and hydraulic implement work better on this data: 70% (2,034 kg / 4,484 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann D-550 Hydrostat and SOMECA 1380 (TD), with the call on each
QuestionD-550 Hydrostat1380 (TD)Call
Which puts more power through the PTO shaft?99.2 kW (133.0 hp)Traktorenlexikon, “Hürlimann D 550 Hydrostat”99.3 kW (133.2 hp)Traktorenlexikon, “Someca 1380”Not comparableNot comparable on power at the PTO shaft: the D-550 Hydrostat has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the D-550 Hydrostat and the 1380 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the D-550 Hydrostat and the 1380 (TD).
Which pumps more oil for implements?52.0 L/min (13.7 gpm)Traktorenlexikon, “Hürlimann D 550 Hydrostat”53.5 L/min (14.1 gpm)Traktorenlexikon, “Someca 1380”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “Hürlimann D 550 Hydrostat”4,934 kg (10,878 lb)Traktorenlexikon, “Someca 1380”AheadThe SOMECA 1380 (TD) has 70% more lift (2,034 kg / 4,484 lb) than the Hürlimann D-550 Hydrostat (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,300 kg (9,480 lb)Traktorenlexikon, “Hürlimann D 550 Hydrostat”4,875 kg (10,748 lb)Traktorenlexikon, “Someca 1380”Ahead (a fact, not an advantage)The SOMECA 1380 (TD) is 13% heavier (575 kg / 1,268 lb) than the Hürlimann D-550 Hydrostat (both unladen weight, as stated by the source).
Which may carry more ballast and load?8,650 kg (19,070 lb)Traktorenlexikon, “Someca 1380”No figureNo call on maximum permissible mass: no figure on record for the D-550 Hydrostat.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Hürlimann D 550 Hydrostat”12 to 24 forwardTraktorenlexikon, “Someca 1380”DifferTransmissions differ in kind: the Hürlimann D-550 Hydrostat is stepless (CVT) and the SOMECA 1380 (TD) has 12 to 24 forward gears — not called.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the D-550 Hydrostat and the 1380 (TD).
Which is faster on the road?27 km/h (16.8 mph)Traktorenlexikon, “Hürlimann D 550 Hydrostat”25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Someca 1380”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Hürlimann D 550 Hydrostat”1000 rpmTraktorenlexikon, “Someca 1380”AheadThe Hürlimann D-550 Hydrostat offers 540 rpm at the PTO, which the SOMECA 1380 (TD) does not (as stated by the sources).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the D-550 Hydrostat and the 1380 (TD).
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann D 550 Hydrostat”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 1380”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?19741979–1983Ahead (a fact, not an advantage)The SOMECA 1380 (TD) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SOMECA 1380 (TD) has 70% more lift (2,034 kg / 4,484 lb) than the Hürlimann D-550 Hydrostat (both lift at the hitch ends, as stated by the source).
  • The SOMECA 1380 (TD) is 13% heavier (575 kg / 1,268 lb) than the Hürlimann D-550 Hydrostat (both unladen weight, as stated by the source).
  • The Hürlimann D-550 Hydrostat offers 540 rpm at the PTO, which the SOMECA 1380 (TD) does not (as stated by the sources).
  • The SOMECA 1380 (TD) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Transmissions differ in kind: the Hürlimann D-550 Hydrostat is stepless (CVT) and the SOMECA 1380 (TD) has 12 to 24 forward gears — not called.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the D-550 Hydrostat has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 1380 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources