5 material differences · fewer than 12

Tractor oneHürlimann D-501948–1952No measured PTO figureTractor twoKramer K 281947–1950No measured PTO figure

Which should you choose?

Read our verdict on the D-50 and the K 28 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann D-50 and Kramer K 28, field by field
Field	D-50	K 28	Gap
Engine
Engine power, claimed claimed	27.6 hp	27.5 hp	—
Engine declared	Hürlimann D-50	Güldner 2F	differs
Displacement declared	2.55 L	2.60 L	—
Maximum torque declared	85 lb·ft · 116 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	12.2 mph · 19.7 km/h	—
Clutch declared	Pedal operated dry single plate clutch	single-disc dry clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,825 lb · 1,735 kg	4,409 lb · 2,000 kg	+15% K 28
Wheelbase declared	—	71.7 in · 1,820 mm	—
Length declared	94.5 in · 2,400 mm	112.2 in · 2,850 mm	+19% K 28
Width declared	59.1 in · 1,500 mm	61.0 in · 1,550 mm	—
Ground clearance declared	—	11.8 in · 300 mm	—
Turning radius, braked declared	8.2 ft · 2.50 m	6.6 ft · 2.00 m	+25% D-50
Fuel tank declared	—	29.6 qt · 28 L	—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hürlimann D-50 sources

Source

Source: Traktorenlexikon, “Hürlimann D 50”

Kramer K 28 sources