5 material differences · fewer than 12

Tractor oneHürlimann D-3001947–1954No measured PTO figureTractor twoLanz D 25391937–1954No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (78%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

5 material differences · 1 fields identical or within 5%, which is not counted as material

Hürlimann D-300 and Lanz D 2539, field by field
FieldD-300D 2539Gap
Engine
Engine power, claimed claimed54.2 hp54.0 hp—
Engine declaredHürlimann D-300——
Displacement declared5.52 L——
Maximum torque declared205 lb·ft · 279 N·m——
Transmission
Top speed declared12.4 mph · 20 km/h20.4 mph · 32.8 km/h+64% D 2539
Clutch declaredPedal operated dry single plate clutch——
Hydraulics & hitch
Rear PTO speeds declared540 rpm750 rpmdiffers
Weight & dimensions
Unladen weight declared5,622 lb · 2,550 kg10,009 lb · 4,540 kg+78% D 2539
Wheelbase declared—99.0 in · 2,515 mm—
Length declared110.2 in · 2,800 mm154.3 in · 3,920 mm+40% D 2539
Width declared62.2 in · 1,580 mm85.0–98.4 in · 2,160–2,500 mmdiffers
Ground clearance declared—10.8 in · 275 mm—
Turning radius, braked declared10.2 ft · 3.10 m——
Fuel tank declared—211.3 qt · 200 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hürlimann D-300 sources

Source
  • Source: Traktorenlexikon, “Hürlimann D 300”

Lanz D 2539 sources

Source
  • Source: Traktorenlexikon, “Lanz D 2539”