Hürlimann D-210 (A) Synchromatic or J.I. Case 831?

Which should you choose?

On performance, every comparable figure that differs favours the J.I. Case 831: hydraulic flow. It is also ahead on top speed. On features, the Hürlimann D-210 (A) Synchromatic is ahead on forward gears and drive.

  • The J.I. Case 831 suits loader and hydraulic implement work better on this data: 63% (22.7 L/min / 6.0 gpm) more hydraulic flow.
  • The J.I. Case 831 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann D-210 (A) Synchromatic and J.I. Case 831, with the call on each
QuestionD-210 (A) Synchromatic831Call
Which puts more power through the PTO shaft?48.2 kW (64.6 hp)Traktorenlexikon, “Hürlimann D 210 (A)”47.3 kW (63.4 hp)Traktorenlexikon, “Case 831”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the D-210 (A) Synchromatic and the 831.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the D-210 (A) Synchromatic and the 831.
Which pumps more oil for implements?36.0 L/min (9.5 gpm)Traktorenlexikon, “Hürlimann D 210 (A)”58.7 L/min (15.5 gpm)Traktorenlexikon, “Case 831”AheadThe J.I. Case 831 has 63% more hydraulic flow (22.7 L/min / 6.0 gpm) than the Hürlimann D-210 (A) Synchromatic (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,640 kg (5,820 lb)Traktorenlexikon, “Hürlimann D 210 (A)”—No figureNo call on three-point lift: no figure on record for the 831.
Which is heavier, for traction?2,850 kg (6,283 lb)Traktorenlexikon, “Hürlimann D 210 (A)”3,241 kg (7,145 lb)Traktorenlexikon, “Case 831”Ahead (a fact, not an advantage)The J.I. Case 831 is 14% heavier (391 kg / 862 lb) than the Hürlimann D-210 (A) Synchromatic (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the D-210 (A) Synchromatic and the 831.
Which has the wider choice of gears?12Traktorenlexikon, “Hürlimann D 210 (A)”8Traktorenlexikon, “Case 831”AheadThe Hürlimann D-210 (A) Synchromatic has 50% more forward gears (4 gears) than the J.I. Case 831 (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the D-210 (A) Synchromatic and the 831.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Hürlimann D 210 (A)”30 km/h (18.6 mph)Traktorenlexikon, “Case 831”AheadThe J.I. Case 831 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann D-210 (A) Synchromatic (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Hürlimann D 210 (A)”540/1000 rpmTraktorenlexikon, “Case 831”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Case 831”No figureNo call on PTO independence: not stated for the D-210 (A) Synchromatic.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Hürlimann D 210 (A)”2WDTraktorenlexikon, “Case 831”AheadThe Hürlimann D-210 (A) Synchromatic is available with four-wheel drive; the J.I. Case 831 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1972–19741960–1969Ahead (a fact, not an advantage)The Hürlimann D-210 (A) Synchromatic is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The J.I. Case 831 has 63% more hydraulic flow (22.7 L/min / 6.0 gpm) than the Hürlimann D-210 (A) Synchromatic (both pump flow, as stated by the source).
  • The J.I. Case 831 is 14% heavier (391 kg / 862 lb) than the Hürlimann D-210 (A) Synchromatic (both unladen weight, as stated by the source).
  • The Hürlimann D-210 (A) Synchromatic has 50% more forward gears (4 gears) than the J.I. Case 831 (both forward gears, as stated by the source).
  • The J.I. Case 831 has 20% more top speed (5.0 km/h / 3.1 mph) than the Hürlimann D-210 (A) Synchromatic (both top speed forward, as stated by the source).
  • The Hürlimann D-210 (A) Synchromatic is available with four-wheel drive; the J.I. Case 831 is two-wheel drive (as stated by the sources).
  • The Hürlimann D-210 (A) Synchromatic is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources