4 material differences · fewer than 12
Tractor oneHürlimann D-100 Super-Spezial1957–1960No measured PTO figureTractor twoURSUS C-451947–1959No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (95%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
4 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | D-100 Super-Spezial | C-45 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44 hp | — |
| Engine declared | Hürlimann D-100 | — | — |
| Displacement declared | 4.02 L | — | — |
| Maximum torque declared | 151 lb·ft · 205 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 3.9–10.4 mph · 6.2–16.7 km/h | differs |
| Clutch declared | — | Mechanically-operated dry double-plate clutch, mounted on the right journal of the crankshaft | — |
| Hydraulics & hitch | |||
| Pressure declared | 640 psi · 44 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 630 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,233 lb · 1,920 kg | 8,267–8,433 lb · 3,750–3,825 kg | differs |
| Wheelbase declared | 79.9 in · 2,030 mm | 80.1 in · 2,035 mm | — |
| Length declared | 125.2 in · 3,180 mm | — | — |
| Width declared | 68.9 in · 1,750 mm | 70.9 in · 1,800 mm | — |
| Ground clearance declared | — | 8.7 in · 220 mm | — |
| Turning radius, braked declared | 9.0 ft · 2.75 m | — | — |
| Fuel tank declared | 47.6 qt · 45 L | 100.4 qt · 95.0 L | +111% C-45 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hürlimann D-100 Super-Spezial sources
- Source: Traktorenlexikon, “Hürlimann D 100 SSP”
- Source: Traktorenlexikon, “Hürlimann D 100”
URSUS C-45 sources
- Source: Wikipedia (pl): Ursus C-45 (open data)
- Source: Traktorenlexikon, “Ursus C-45”