Hürlimann 95 XT vs VALMET 6350 HiTech

10 material differences · fewer than 12

Tractor one

from 2004

No measured PTO figure

Tractor two

1999–2006

No measured PTO figure

Which should you choose?

Read our verdict on the 95 XT and the 6350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann 95 XT and VALMET 6350 HiTech, field by field
Field	95 XT	6350 HiTech	Gap
Engine
Engine power, claimed claimed	89.7 hp	88.8 hp	—
Engine declared	Hürlimann H-1000.4 WT-8	VALMET 420 DSRE or 44.311 DT	differs
Displacement declared	4.00 L	4.40 L	+10% 6350 HiTech
Maximum torque declared	249 lb·ft · 338 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry SLH single-plate clutch as drive clutch	—	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	18.5 gpm · 70.0 L/min	+57% 6350 HiTech
Pressure declared	3,046 psi · 210 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	12,346 lb · 5,600 kg	—
Rear PTO speeds declared	540/1000/540E/1000E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,083 lb · 4,120 kg	10,516 lb · 4,770 kg	+16% 6350 HiTech
Maximum permissible mass declared	15,432 lb · 7,000 kg	19,842 lb · 9,000 kg	+29% 6350 HiTech
Wheelbase declared	93.4 in · 2,373 mm	91.6 in · 2,326 mm	—
Length declared	162.2 in · 4,120 mm	180.5 in · 4,585 mm	+11% 6350 HiTech
Width declared	89.8 in · 2,280 mm	92.3 in · 2,345 mm	—
Height declared	103.5 in · 2,630 mm	110.2 in · 2,800 mm	+6% 6350 HiTech
Ground clearance declared	14.6 in · 370 mm	17.1 in · 434 mm	+17% 6350 HiTech
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	147.9 qt · 140.0 L	174.4 qt · 165.0 L	+18% 6350 HiTech

Source

Source