Hürlimann 910.6 XT or VALMET 905-4?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 905-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 905-4 suits loader and hydraulic implement work better on this data: 16% (6.5 L/min / 1.7 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 910.6 XT | 905-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 77.2 kW (103.5 hp)Traktorenlexikon, “Hürlimann XT 910.6” | 77.2 kW (103.5 hp)Traktorenlexikon, “Valmet 905” | Not comparableNot comparable on power at the PTO shaft: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 905-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 910.6 XT and the 905-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 910.6 XT and the 905-4. |
| Which pumps more oil for implements? | 41.0 L/min (10.8 gpm)Traktorenlexikon, “Hürlimann XT 910.6” | 47.5 L/min (12.5 gpm)Traktorenlexikon, “Valmet 905” | AheadThe VALMET 905-4 has 16% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Hürlimann 910.6 XT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 4,190 kg (9,237 lb)Traktorenlexikon, “Valmet 905” | No figureNo call on three-point lift: no figure on record for the 910.6 XT. |
| Which is heavier, for traction? | 4,550 kg (10,031 lb)Traktorenlexikon, “Hürlimann XT 910.6” | 4,130 kg (9,105 lb)Traktorenlexikon, “Valmet 905” | Ahead (a fact, not an advantage)The Hürlimann 910.6 XT is 10% heavier (420 kg / 926 lb) than the VALMET 905-4 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 910.6 XT and the 905-4. |
| Which has the wider choice of gears? | 20 to 45Traktorenlexikon, “Hürlimann XT 910.6” | 14 to 16Traktorenlexikon, “Valmet 905” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 910.6 XT and the 905-4. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 910.6” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 905” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 910.6” | 540/1000 rpmTraktorenlexikon, “Valmet 905” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Valmet 905” | No figureNo call on PTO independence: not stated for the 910.6 XT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann XT 910.6” | 4WDTraktorenlexikon, “Valmet 905” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1984–1989 | Ahead (a fact, not an advantage)The Hürlimann 910.6 XT is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 905-4 has 16% more hydraulic flow (6.5 L/min / 1.7 gpm) than the Hürlimann 910.6 XT (both pump flow, as stated by the source).
- The Hürlimann 910.6 XT is 10% heavier (420 kg / 926 lb) than the VALMET 905-4 (both unladen weight, as stated by the source).
- The Hürlimann 910.6 XT is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 905-4 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources