Hürlimann 910.6 XT or New Holland TM 115 (Traktorenlexikon)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland TM 115 suits loader and hydraulic implement work better on this data: 189% (77.3 L/min / 20.4 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Hürlimann 910.6 XT and New Holland TM 115 (Traktorenlexikon), with the call on each
Question910.6 XTTM 115Call
Which puts more power through the PTO shaft?77.2 kW (103.5 hp)Traktorenlexikon, “Hürlimann XT 910.6”77.2 kW (103.5 hp)Traktorenlexikon, “New Holland TM115”Not comparableNot comparable on power at the PTO shaft: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 910.6 XT and the TM 115.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 910.6 XT and the TM 115.
Which pumps more oil for implements?41.0 L/min (10.8 gpm)Traktorenlexikon, “Hürlimann XT 910.6”118.3 L/min (31.3 gpm)Traktorenlexikon, “New Holland TM115”AheadThe New Holland TM 115 has 189% more hydraulic flow (77.3 L/min / 20.4 gpm) than the Hürlimann 910.6 XT (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?—6,560 kg (14,462 lb)Traktorenlexikon, “New Holland TM115”No figureNo call on three-point lift: no figure on record for the 910.6 XT.
Which is heavier, for traction?4,550 kg (10,031 lb)Traktorenlexikon, “Hürlimann XT 910.6”5,334 kg (11,759 lb)Traktorenlexikon, “New Holland TM115”Ahead (a fact, not an advantage)The New Holland TM 115 is 17% heavier (784 kg / 1,728 lb) than the Hürlimann 910.6 XT (both unladen weight, as stated by the source).
Which may carry more ballast and load?—8,500 kg (18,739 lb)Traktorenlexikon, “New Holland TM115”No figureNo call on maximum permissible mass: no figure on record for the 910.6 XT.
Which has the wider choice of gears?20 to 45Traktorenlexikon, “Hürlimann XT 910.6”18 to 24Traktorenlexikon, “New Holland TM115”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 910.6 XT and the TM 115.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 910.6”40 km/h (24.9 mph)Traktorenlexikon, “New Holland TM115”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 910.6”540/540E/1000 rpmTraktorenlexikon, “New Holland TM115”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “New Holland TM115”No figureNo call on PTO independence: not stated for the 910.6 XT.
Which drives on both axles?4WDTraktorenlexikon, “Hürlimann XT 910.6”4WDTraktorenlexikon, “New Holland TM115”; OECD test report 1917, 2000EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–20041999–2002EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland TM 115 has 189% more hydraulic flow (77.3 L/min / 20.4 gpm) than the Hürlimann 910.6 XT (both pump flow, as stated by the source).
  • The New Holland TM 115 is 17% heavier (784 kg / 1,728 lb) than the Hürlimann 910.6 XT (both unladen weight, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 910.6 XT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TM 115 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources