Hürlimann 908 XT or Massey Ferguson MF 6245 (A)?
Which should you choose?
On performance, every comparable figure that differs favours the Massey Ferguson MF 6245 (A): hydraulic flow.
- The Massey Ferguson MF 6245 (A) suits loader and hydraulic implement work better on this data: 80% (37.7 L/min / 10.0 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 908 XT | MF 6245 (A) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 58.9 kW (79.0 hp)Traktorenlexikon, “Hürlimann XT 908” | 59.3 kW (79.5 hp)Traktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 908 XT and the MF 6245 (A). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 908 XT and the MF 6245 (A). |
| Which pumps more oil for implements? | 47.0 L/min (12.4 gpm)Traktorenlexikon, “Hürlimann XT 908” | 84.7 L/min (22.4 gpm)Traktorenlexikon, “Massey Ferguson MF 6245” | AheadThe Massey Ferguson MF 6245 (A) has 80% more hydraulic flow (37.7 L/min / 10.0 gpm) than the Hürlimann 908 XT (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,386 kg (5,261 lb)Traktorenlexikon, “Hürlimann XT 908” | 4,250 kg (9,370 lb)Traktorenlexikon, “Massey Ferguson MF 6245” | Not comparableNot comparable on three-point lift: the 908 XT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 908”); the MF 6245 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 6245”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 4,150 kg (9,149 lb)Traktorenlexikon, “Hürlimann XT 908” | 3,920 kg (8,642 lb)Traktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 8,800 kg (19,401 lb)Traktorenlexikon, “Massey Ferguson MF 6245” | No figureNo call on maximum permissible mass: no figure on record for the 908 XT. |
| Which has the wider choice of gears? | 40 to 60Traktorenlexikon, “Hürlimann XT 908” | 16 to 32Traktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 908 XT and the MF 6245 (A). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Hürlimann XT 908” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/540E/1000E rpmTraktorenlexikon, “Hürlimann XT 908” | 540/1000/540E/1000E rpmTraktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 6245” | No figureNo call on PTO independence: not stated for the 908 XT. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Hürlimann XT 908” | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 6245” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–2004 | 1999–2003 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 6245 (A) has 80% more hydraulic flow (37.7 L/min / 10.0 gpm) than the Hürlimann 908 XT (both pump flow, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on three-point lift: the 908 XT: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Hürlimann XT 908”); the MF 6245 (A): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 6245”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources