6 material differences · fewer than 12

Tractor oneHermann Lanz L 25 a1942–1944No measured PTO figureTractor twoSchlüter DSU1947–1948No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (1942–1944; 1947–1948). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

Hermann Lanz L 25 a and Schlüter DSU, field by field
FieldL 25 aDSUGap
Engine
Engine power, claimed claimed24.4 hp24 hp—
Engine declaredDeutz GF2M 115 or wahlweise——
Displacement declared3.98 L——
Transmission
Top speed declared12.1 mph · 19.4 km/h10.6 mph · 17 km/h+14% L 25 a
Clutch declaredsingle-plate dry clutch from Fichtel & SachsSingle-disc dry clutch from Fichtel and Sachs type K 16 Zdiffers
Hydraulics & hitch
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared4,850 lb · 2,200 kg4,189 lb · 1,900 kg+16% L 25 a
Wheelbase declared80.7 in · 2,050 mm74.8 in · 1,900 mm+8% L 25 a
Length declared112.6 in · 2,860 mm122.0 in · 3,100 mm+8% DSU
Width declared59.1 in · 1,500 mm63.0 in · 1,600 mm+7% DSU
Ground clearance declared11.8 in · 300 mm——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Hermann Lanz L 25 a sources

Source
  • Source: Traktorenlexikon, “HELA L 25 a Holzgas”

Schlüter DSU sources

Source
  • Source: Traktorenlexikon, “Schlüter DSU 25”