Hermann Lanz D 648 Allrad vs SOMECA 480 (TD)

11 material differences · fewer than 12

Tractor one

1973–1978

No measured PTO figure

Tractor two

1973–1978

No measured PTO figure

Which should you choose?

Read our verdict on the D 648 Allrad and the 480 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Hermann Lanz D 648 Allrad and SOMECA 480 (TD), field by field
Field	D 648 Allrad	480 (TD)	Gap
Engine
Engine power, claimed claimed	47.1 hp	47.3 hp	—
Engine declared	MWM D 225-3 ( 10/1973 bis 12/1974 )	FIAT-IVECO 8035.02.200 (300)	differs
Displacement declared	—	2.59 L	—
Maximum torque declared	—	112 lb·ft · 152 N·m	—
Transmission
Top speed declared	17.6 mph · 28.4 km/h	15.5 mph · 25 km/h	+14% D 648 Allrad
Clutch declared	Maintenance-free dry single-plate clutch	Pedal operated two stage dry FERODO double clutch	differs
Hydraulics & hitch
Pump flow declared	—	5.8 gpm · 21.8 L/min	—
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift at ends declared	4,079 lb · 1,850 kg	3,417 lb · 1,550 kg	+19% D 648 Allrad
Rear PTO speeds declared	595/980 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,291 lb · 2,400 kg	3,836 lb · 1,740 kg	+38% D 648 Allrad
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	84.3 in · 2,140 mm	75.6 in · 1,920 mm	+11% D 648 Allrad
Length declared	141.7 in · 3,600 mm	117.7 in · 2,990 mm	+20% D 648 Allrad
Width declared	66.9 in · 1,700 mm	65.4 in · 1,660 mm	—
Height declared	51.2 in · 1,300 mm	88.6 in · 2,250 mm	+73% 480 (TD)
Ground clearance declared	14.6 in · 370 mm	14.6 in · 371 mm	—
Turning radius, braked declared	14.3 ft · 4.35 m	9.7 ft · 2.95 m	+47% D 648 Allrad
Fuel tank declared	74.0 qt · 70 L	57.1 qt · 54.0 L	+30% D 648 Allrad

Source

Source