8 material differences · fewer than 12
Tractor oneHermann Lanz D 28 (TD)1948–1952No measured PTO figureTractor twoKramer K 281947–1950No measured PTO figure
Which should you choose?
Read our verdict on the D 28 (TD) and the K 28 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 28 (TD) | K 28 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.5 hp | 27.5 hp | — |
| Engine declared | MWM TD 115 or TD 15 | Güldner 2F | differs |
| Displacement declared | 2.85 L | 2.60 L | +10% D 28 (TD) |
| Maximum torque declared | 116 lb·ft · 157 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.2 mph · 19.7 km/h | — |
| Clutch declared | Single plate dry clutch from Fichtel & Sachs | single-disc dry clutch by Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 550 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,858 lb · 1,750 kg | 4,409 lb · 2,000 kg | +14% K 28 |
| Wheelbase declared | 69.3 in · 1,760 mm | 71.7 in · 1,820 mm | — |
| Length declared | 111.4 in · 2,830 mm | 112.2 in · 2,850 mm | — |
| Width declared | 60.6 in · 1,540 mm | 61.0 in · 1,550 mm | — |
| Ground clearance declared | 14.8 in · 375 mm | 11.8 in · 300 mm | +25% D 28 (TD) |
| Turning radius, braked declared | 4.1 ft · 1.25 m | 6.6 ft · 2.00 m | +60% K 28 |
| Fuel tank declared | 39.1 qt · 37 L | 29.6 qt · 28 L | +32% D 28 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hermann Lanz D 28 (TD) sources
- Source: Traktorenlexikon, “HELA D 28 (TD)”
Kramer K 28 sources
- Source: Traktorenlexikon, “Kramer K 28”
- Source: Traktorenlexikon, “Güldner AF 30”