8 material differences · fewer than 12
Tractor oneHermann Lanz D 28 (TD)1948–1952No measured PTO figureTractor twoHürlimann D-501948–1952No measured PTO figure
Which should you choose?
Read our verdict on the D 28 (TD) and the D-50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 28 (TD) | D-50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.5 hp | 27.6 hp | — |
| Engine declared | MWM TD 115 or TD 15 | Hürlimann D-50 | differs |
| Displacement declared | 2.85 L | 2.55 L | +12% D 28 (TD) |
| Maximum torque declared | 116 lb·ft · 157 N·m | 85 lb·ft · 116 N·m | +35% D 28 (TD) |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | Single plate dry clutch from Fichtel & Sachs | Pedal operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 550 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,858 lb · 1,750 kg | 3,825 lb · 1,735 kg | — |
| Wheelbase declared | 69.3 in · 1,760 mm | — | — |
| Length declared | 111.4 in · 2,830 mm | 94.5 in · 2,400 mm | +18% D 28 (TD) |
| Width declared | 60.6 in · 1,540 mm | 59.1 in · 1,500 mm | — |
| Height, over the steering wheel declared | 59.1 in · 1,500 mm | 55.9 in · 1,420 mm | +6% D 28 (TD) |
| Ground clearance declared | 14.8 in · 375 mm | — | — |
| Turning radius, braked declared | 4.1 ft · 1.25 m | 8.2 ft · 2.50 m | +100% D-50 |
| Fuel tank declared | 39.1 qt · 37 L | — | — |
Hermann Lanz D 28 (TD) sources
Source
- Source: Traktorenlexikon, “HELA D 28 (TD)”
Hürlimann D-50 sources
Source
- Source: Traktorenlexikon, “Hürlimann D 50”