7 material differences · fewer than 12

Tractor oneHELA D 381938No measured PTO figureTractor twoLanz D 65111931–1935No measured PTO figure

Which should you choose?

Read our verdict on the D 38 and the D 6511 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 2 fields identical or within 5%, which is not counted as material

HELA D 38 and Lanz D 6511, field by field
FieldD 38D 6511Gap
Engine
Engine power, claimed claimed21.6 hp21.6 hp—
Engine declaredKHD F2M 414——
Displacement declared2.20 L——
Maximum torque declared88 lb·ft · 120 N·m——
Transmission
Top speed declared12.4 mph · 20 km/h8.3–9.7 mph · 13.4–15.6 km/hdiffers
Clutch declaredSingle-plate dry clutch by Lanz or Fichtel & SachsThree-jaw clutch operated by two pedals with clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared550 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared3,527 lb · 1,600 kg8,708 lb · 3,950 kg+147% D 6511
Wheelbase declared70.9 in · 1,800 mm73.4 in · 1,864 mm—
Length declared114.2 in · 2,900 mm121.7 in · 3,090 mm+7% D 6511
Width declared60.6 in · 1,540 mm75.3 in · 1,912 mm+24% D 6511
Ground clearance declared14.2 in · 360 mm9.1 in · 230 mm+57% D 38
Turning radius, braked declared4.1 ft · 1.25 m——
Fuel tank declared—63.4 qt · 60 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

HELA D 38 sources

Source
  • Source: Traktorenlexikon, “HELA D38 (1938)”
  • Source: Traktorenlexikon, “Fahr D 22”

Lanz D 6511 sources

Source
  • Source: Traktorenlexikon, “Lanz D 6511”