4 material differences · fewer than 12
Tractor oneHanomag Robust 900 A (S)1967–1969No measured PTO figureTractor twoHanomag Robust 900 (S)1967–1969No measured PTO figure
Which should you choose?
Read our verdict on the Robust 900 A (S) and the Robust 900 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | Robust 900 A (S) | Robust 900 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83 hp | 83 hp | — |
| Engine declared | Hanomag D162 R1 | Hanomag D162 R | differs |
| Displacement declared | 4.71 L | 4.71 L | — |
| Maximum torque declared | 195 lb·ft · 265 N·m | 195 lb·ft · 265 N·m | — |
| Transmission | |||
| Top speed declared | 12.3–16.9 mph · 19.87–27.15 km/h | 12.3–16.9 mph · 19.87–27.15 km/h | — |
| Clutch declared | Dual clutch for transmission and PTO | LuK DT 310/310 G | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm / 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 7,055–8,223 lb · 3,200–3,730 kg | 7,055–8,223 lb · 3,200–3,730 kg | — |
| Wheelbase declared | 97.4–98.8 in · 2,475–2,510 mm | 98.8 in · 2,510 mm | — |
| Length declared | 157.1 in · 3,990 mm | 157.1 in · 3,990 mm | — |
| Width declared | 79.3–84.6 in · 2,015–2,150 mm | 76.8 in · 1,950 mm | differs |
| Ground clearance declared | 12.6 in · 320 mm | 14.2 in · 360 mm | +13% Robust 900 (S) |
| Turning radius, braked declared | 13.5 ft · 4.10 m | 13.5 ft · 4.10 m | — |
| Fuel tank declared | 132.1 qt · 125 L | 132.1 qt · 125 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag Robust 900 A (S) sources
- Source: Traktorenlexikon, “Hanomag Robust 900 A (S)”
Hanomag Robust 900 (S) sources
- Source: Traktorenlexikon, “Hanomag Robust 900 (S)”