9 material differences · fewer than 12
Tractor oneHanomag R 35 B1953–1957No measured PTO figureTractor twoSchlüter Super 350 / 350 V1967–1972No measured PTO figure
Which should you choose?
Read our verdict on the R 35 B and the Super 350 / 350 V → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | R 35 B | Super 350 / 350 V | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34.3 hp | — |
| Engine declared | Hanomag D 28 | Schlüter SD 100 W3 | differs |
| Displacement declared | 2.80 L | 2.94 L | — |
| Maximum torque declared | 99 lb·ft · 134 N·m | 108 lb·ft · 147 N·m | +10% Super 350 / 350 V |
| Transmission | |||
| Top speed declared | 11.4–15.7 mph · 18.3–25.2 km/h | 12.4 mph · 20 km/h | differs |
| Clutch declared | Single-plate dry clutch from Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | — | — |
| Rear PTO speeds declared | 1615 | 615/1230 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,880 lb · 1,760 kg | 4,729–4,949 lb · 2,145–2,245 kg | differs |
| Wheelbase declared | 70.9 in · 1,800 mm | 78.7 in · 2,000 mm | +11% Super 350 / 350 V |
| Length declared | 110.6 in · 2,810 mm | 137.4 in · 3,490 mm | +24% Super 350 / 350 V |
| Width declared | 65.0 in · 1,650 mm | 67.3 in · 1,710 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | — | — |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 11.0 ft · 3.35 m | +8% Super 350 / 350 V |
| Fuel tank declared | 47.6 qt · 45 L | 60.2 qt · 57 L | +27% Super 350 / 350 V |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag R 35 B sources
- Source: Traktorenlexikon, “Hanomag R 35 B”
Schlüter Super 350 / 350 V sources
- Source: Traktorenlexikon, “Schlüter Super 350 / 350 V”
- Source: Traktorenlexikon, “Schlüter S 350 / 350 V”