9 material differences · fewer than 12
Tractor oneHanomag R 35 B1953–1957No measured PTO figureTractor twoRenault N 711960–1963No measured PTO figure
Which should you choose?
Read our verdict on the R 35 B and the N 71 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | R 35 B | N 71 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34.1 hp | — |
| Engine declared | Hanomag D 28 | Perkins P 3 TA/4924 | differs |
| Displacement declared | 2.80 L | 2.37 L | +18% R 35 B |
| Maximum torque declared | 99 lb·ft · 134 N·m | — | — |
| Transmission | |||
| Top speed declared | 11.4–15.7 mph · 18.3–25.2 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Single-plate dry clutch from Fichtel & Sachs | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | 4.5 gpm · 17.0 L/min | +6% N 71 |
| Rear PTO speeds declared | 1615 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,880 lb · 1,760 kg | 3,560 lb · 1,615 kg | +9% R 35 B |
| Wheelbase declared | 70.9 in · 1,800 mm | 68.9 in · 1,750 mm | — |
| Length declared | 110.6 in · 2,810 mm | 123.2 in · 3,130 mm | +11% N 71 |
| Width declared | 65.0 in · 1,650 mm | 60.2–87.8 in · 1,530–2,230 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 14.2 in · 360 mm | — |
| Turning radius, braked declared | 10.2 ft · 3.10 m | 9.7 ft · 2.97 m | — |
| Fuel tank declared | 47.6 qt · 45 L | 42.3 qt · 40.0 L | +13% R 35 B |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag R 35 B sources
Source
- Source: Traktorenlexikon, “Hanomag R 35 B”
Renault N 71 sources
Source
- Source: Traktorenlexikon, “Renault N, E, V71 R7051”