12 material differences
Tractor oneHanomag R 35/451955–1957No measured PTO figureTractor twoVolvo T-311949–1957No measured PTO figure
Which should you choose?
Read our verdict on the R 35/45 and the T-31 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | R 35/45 | T-31 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 34.3 hp | 34 hp | — |
| Engine declared | Hanomag D 28 LA | AB-VOLVO D 4 F | differs |
| Displacement declared | 2.80 L | 3.46 L | +23% T-31 |
| Maximum torque declared | 111 lb·ft · 151 N·m | 134 lb·ft · 182 N·m | +21% T-31 |
| Transmission | |||
| Top speed declared | 11.9 mph · 19.2 km/h | 18.6 mph · 30 km/h | +56% T-31 |
| Clutch declared | double clutch by Fichtel & Sachs | Pedal operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 4.2 gpm · 16.0 L/min | 6.3 gpm · 23.8 L/min | +49% T-31 |
| Pressure declared | — | 1,276 psi · 88 bar | — |
| Rear PTO speeds declared | 597 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,453–4,678 lb · 2,020–2,122 kg | 5,060 lb · 2,295 kg | differs |
| Maximum permissible mass declared | 5,732 lb · 2,600 kg | — | — |
| Wheelbase declared | 72.8 in · 1,850 mm | 77.2 in · 1,960 mm | +6% T-31 |
| Length declared | 120.1 in · 3,050 mm | 122.6 in · 3,115 mm | — |
| Width declared | 62.2 in · 1,580 mm | 72.4 in · 1,839 mm | +16% T-31 |
| Ground clearance declared | 17.7 in · 450 mm | 16.5 in · 420 mm | +7% R 35/45 |
| Turning radius, braked declared | 10.7 ft · 3.25 m | — | — |
| Fuel tank declared | 47.6 qt · 45 L | 63.4 qt · 60.0 L | +33% T-31 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag R 35/45 sources
Source
- Source: Traktorenlexikon, “Hanomag R 35/45”
Volvo T-31 sources
Source
- Source: Traktorenlexikon, “Volvo T 31”
- Source: Traktorenlexikon, “Bolinder-Munktell BM 31”