Güldner G 60 (S) vs Massey Ferguson MF 174 (A)

9 material differences · fewer than 12

Tractor one

1968–1969

No measured PTO figure

Tractor two

1973–1983

No measured PTO figure

Which should you choose?

Read our verdict on the G 60 (S) and the MF 174 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Güldner G 60 (S) and Massey Ferguson MF 174 (A), field by field
Field	G 60 (S)	MF 174 (A)	Gap
Engine
Engine power, claimed claimed	59.3 hp	60.2 hp	—
Engine declared	Güldner 6 L 79	Perkins A 4.236	differs
Displacement declared	4.71 L	3.87 L	+22% G 60 (S)
Maximum torque declared	174 lb·ft · 236 N·m	183 lb·ft · 248 N·m	—
Transmission
Top speed declared	16.3 mph · 26.22 km/h	15.5 mph · 25 km/h	—
Clutch declared	—	Pedal-operated dry LUK double clutch with 279 mm diameter	—
Hydraulics & hitch
Pressure declared	2,134 psi · 147 bar	2,589 psi · 178 bar	+21% MF 174 (A)
Three-point lift at ends declared	4,850 lb · 2,200 kg	3,362 lb · 1,525 kg	+44% G 60 (S)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,063 lb · 2,750 kg	4,872 lb · 2,210 kg	+24% G 60 (S)
Maximum permissible mass declared	9,700 lb · 4,400 kg	—	—
Wheelbase declared	91.1 in · 2,315 mm	87.0 in · 2,210 mm	—
Length declared	155.7 in · 3,955 mm	142.5 in · 3,620 mm	+9% G 60 (S)
Width declared	73.4 in · 1,865 mm	—	—
Height declared	64.0 in · 1,625 mm	55.9 in · 1,420 mm	+14% G 60 (S)
Ground clearance declared	15.7 in · 400 mm	—	—
Turning radius, braked declared	11.7 ft · 3.58 m	10.9 ft · 3.31 m	+8% G 60 (S)
Fuel tank declared	68.7 qt · 65 L	64.5 qt · 61.0 L	+7% G 60 (S)

Source

Source