6 material differences · fewer than 12
Tractor oneGüldner G 50 (Gotland)1962No measured PTO figureTractor twoHanomag Granit 501 E (S)1967–1970No measured PTO figure
Which should you choose?
Read our verdict on the G 50 (Gotland) and the Granit 501 E (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | G 50 (Gotland) | Granit 501 E (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.1 hp | 47 hp | — |
| Engine declared | Güldner 4 L 79 | — | — |
| Displacement declared | 3.14 L | — | — |
| Maximum torque declared | 127 lb·ft · 173 N·m | 109 lb·ft · 148 N·m | +17% G 50 (Gotland) |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 12.4–16.9 mph · 20.0–27.2 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | — | — |
| Pressure declared | 2,489 psi · 172 bar | — | — |
| Rear PTO speeds declared | 572/1120 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,908 lb · 2,680 kg | 4,762 lb · 2,160 kg | +24% G 50 (Gotland) |
| Maximum permissible mass declared | — | 7,606 lb · 3,450 kg | — |
| Wheelbase declared | 86.6 in · 2,200 mm | 82.7 in · 2,100 mm | — |
| Length declared | 144.1 in · 3,660 mm | 134.6 in · 3,420 mm | +7% G 50 (Gotland) |
| Width declared | 72.1 in · 1,832 mm | 69.5 in · 1,765 mm | — |
| Ground clearance declared | 16.3 in · 415 mm | 15.4 in · 390 mm | +6% G 50 (Gotland) |
| Turning radius, braked declared | — | 10.5 ft · 3.20 m | — |
| Fuel tank declared | 68.7 qt · 65 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Güldner G 50 (Gotland) sources
- Source: Traktorenlexikon, “Güldner G 50 Gotland”
Hanomag Granit 501 E (S) sources
- Source: Traktorenlexikon, “Hanomag Granit 501 E (S)”