Güldner G 45 A (S) vs SAME Atlanta 45 (DT)

9 material differences · fewer than 12

Tractor one

1965–1969

No measured PTO figure

Tractor two

1966–1970

No measured PTO figure

Which should you choose?

Read our verdict on the G 45 A (S) and the Atlanta 45 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 2 fields identical or within 5%, which is not counted as material

Güldner G 45 A (S) and SAME Atlanta 45 (DT), field by field
Field	G 45 A (S)	Atlanta 45 (DT)	Gap
Engine
Engine power, claimed claimed	44.1 hp	43.4 hp	—
Engine declared	Güldner 4 L 79	SAME 954/V	differs
Displacement declared	3.14 L	3.40 L	+8% Atlanta 45 (DT)
Maximum torque declared	127 lb·ft · 173 N·m	—	—
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% Atlanta 45 (DT)
Clutch declared	Pedal operated dry double clutch by Fichtel & Sachs	—	—
Hydraulics & hitch
Pump flow declared	—	3.2 gpm · 12.0 L/min	—
Pressure declared	2,134 psi · 147 bar	—	—
Three-point lift at ends declared	4,211 lb · 1,910 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,302 lb · 2,405 kg	3,616 lb · 1,640 kg	+47% G 45 A (S)
Maximum permissible mass declared	8,818 lb · 4,000 kg	—	—
Wheelbase declared	82.8 in · 2,102 mm	75.2 in · 1,910 mm	+10% G 45 A (S)
Length declared	140.3 in · 3,564 mm	113.8 in · 2,890 mm	+23% G 45 A (S)
Width declared	67.7 in · 1,720 mm	64.2 in · 1,630 mm	+6% G 45 A (S)
Height declared	60.7 in · 1,541 mm	58.7 in · 1,490 mm	—
Ground clearance declared	14.8 in · 377 mm	18.5 in · 470 mm	+25% Atlanta 45 (DT)
Turning radius, braked declared	12.3 ft · 3.75 m	—	—
Fuel tank declared	50.7 qt · 48 L	—	—

Source

Source