Güldner G 45 A (S) or Hermann Lanz D 542 Obst?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 542 Obst has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Güldner G 45 A (S) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
- The Hermann Lanz D 542 Obst suits road haulage better on this data: 20% (4.0 km/h / 2.5 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | G 45 A (S) | D 542 Obst | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 32.9 kW (44.1 hp)Traktorenlexikon, “Güldner G 45A” | 32.9 kW (44.1 hp)Traktorenlexikon, “HELA D 542 Obst” | Not comparableNot comparable on power at the PTO shaft: the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 542 Obst has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the G 45 A (S) and the D 542 Obst. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the G 45 A (S) and the D 542 Obst. |
| Which pumps more oil for implements? | — | — | No figureNo call on hydraulic flow: no figure on record for the G 45 A (S) and the D 542 Obst. |
| Which lifts more on the three-point hitch? | 1,910 kg (4,211 lb)Traktorenlexikon, “Güldner G 45A” | 2,000 kg (4,409 lb)Traktorenlexikon, “HELA D 542 Obst” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 2,405 kg (5,302 lb)Traktorenlexikon, “Güldner G 45A” | 2,250 kg (4,960 lb)Traktorenlexikon, “HELA D 542 Obst” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 4,000 kg (8,818 lb)Traktorenlexikon, “Güldner G 45A” | — | No figureNo call on maximum permissible mass: no figure on record for the D 542 Obst. |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Güldner G 45A” | 10Traktorenlexikon, “HELA D 542 Obst” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | YesTraktorenlexikon, “HELA D 542 Obst” | No figureNo call on a creeper range: not stated for the G 45 A (S). |
| Which is faster on the road? | 20 km/h (12.4 mph)Traktorenlexikon, “Güldner G 45A” | 24.0 km/h (14.9 mph)Traktorenlexikon, “HELA D 542 Obst” | AheadThe Hermann Lanz D 542 Obst has 20% more top speed (4.0 km/h / 2.5 mph) than the Güldner G 45 A (S) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Güldner G 45A” | 540/1120 rpmTraktorenlexikon, “HELA D 542 Obst” | AheadThe Güldner G 45 A (S) offers 1000 rpm at the PTO, which the Hermann Lanz D 542 Obst does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Güldner G 45A” | independentTraktorenlexikon, “HELA D 542 Obst” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Güldner G 45A” | 2WDTraktorenlexikon, “HELA D 542 Obst” | AheadThe Güldner G 45 A (S) is available with four-wheel drive; the Hermann Lanz D 542 Obst is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1965–1969 | 1973–1979 | Ahead (a fact, not an advantage)The Hermann Lanz D 542 Obst is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Hermann Lanz D 542 Obst has 20% more top speed (4.0 km/h / 2.5 mph) than the Güldner G 45 A (S) (both top speed forward, as stated by the source).
- The Güldner G 45 A (S) offers 1000 rpm at the PTO, which the Hermann Lanz D 542 Obst does not (as stated by the sources).
- The Güldner G 45 A (S) is available with four-wheel drive; the Hermann Lanz D 542 Obst is two-wheel drive (as stated by the sources).
- The Hermann Lanz D 542 Obst is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Not comparable on power at the PTO shaft: the G 45 A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 542 Obst has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources