Güldner G 45 (S) vs SAME Atlanta 45 (DT)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 45 (S) and the Atlanta 45 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | G 45 (S) | Atlanta 45 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.1 hp | 43.4 hp | — |
| Engine declared | Güldner 4 L 79 | SAME 954/V | differs |
| Displacement declared | 3.14 L | 3.40 L | +8% Atlanta 45 (DT) |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Pedal operated dry double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 3.2 gpm · 12.0 L/min | — |
| Pressure declared | 2,134 psi · 147 bar | — | — |
| Three-point lift at ends declared | 4,211 lb · 1,910 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,619 lb · 2,095 kg | 3,616 lb · 1,640 kg | +28% G 45 (S) |
| Maximum permissible mass declared | 7,496 lb · 3,400 kg | — | — |
| Wheelbase declared | 82.4 in · 2,092 mm | 75.2 in · 1,910 mm | +10% G 45 (S) |
| Length declared | 137.0 in · 3,480 mm | 113.8 in · 2,890 mm | +20% G 45 (S) |
| Width declared | 64.5 in · 1,638 mm | 64.2 in · 1,630 mm | — |
| Height declared | 59.5 in · 1,512 mm | 58.7 in · 1,490 mm | — |
| Ground clearance declared | 15.2 in · 387 mm | 18.5 in · 470 mm | +21% Atlanta 45 (DT) |
| Turning radius, braked declared | 11.0 ft · 3.35 m | — | — |
| Fuel tank declared | 52.8 qt · 50 L | — | — |
Güldner G 45 (S) sources
Source
- Source: Traktorenlexikon, “Güldner G 45”
- Source: Traktorenlexikon, “Güldner G 50 Gotland”
SAME Atlanta 45 (DT) sources
Source
- Source: Traktorenlexikon, “SAME Atlanta 45 (DT)”