Güldner G 45 (S) vs John Deere 620
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 45 (S) and the 620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | G 45 (S) | 620 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.1 hp | 43.4 hp | — |
| Engine declared | Güldner 4 L 79 | — | — |
| Displacement declared | 3.14 L | — | — |
| Maximum torque declared | — | 90 lb·ft · 122 N·m | — |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 11.8 mph · 19 km/h | differs |
| Clutch declared | Pedal operated dry double clutch | Hand lever operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.9 gpm · 33.7 L/min | — |
| Pressure declared | 2,134 psi · 147 bar | — | — |
| Three-point lift at ends declared | 4,211 lb · 1,910 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,619 lb · 2,095 kg | 5,858 lb · 2,657 kg | +27% 620 |
| Maximum permissible mass declared | 7,496 lb · 3,400 kg | — | — |
| Wheelbase declared | 82.4 in · 2,092 mm | 80.5 in · 2,045 mm | — |
| Length declared | 137.0 in · 3,480 mm | 135.2 in · 3,435 mm | — |
| Width declared | 64.5 in · 1,638 mm | 86.6 in · 2,200 mm | +34% 620 |
| Height declared | 59.5 in · 1,512 mm | 66.0 in · 1,676 mm | +11% 620 |
| Ground clearance declared | 15.2 in · 387 mm | 13.0 in · 330 mm | +17% G 45 (S) |
| Turning radius, braked declared | 11.0 ft · 3.35 m | — | — |
| Fuel tank declared | 52.8 qt · 50 L | — | — |
Güldner G 45 (S) sources
Source
- Source: Traktorenlexikon, “Güldner G 45”
- Source: Traktorenlexikon, “Güldner G 50 Gotland”
John Deere 620 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 620”