Güldner G 45 (S) or Hanomag R 45 A/AE?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the G 45 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R 45 A/AE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Güldner G 45 (S) and Hanomag R 45 A/AE, with the call on each
QuestionG 45 (S)R 45 A/AECall
Which puts more power through the PTO shaft?32.9 kW (44.1 hp)Traktorenlexikon, “Güldner G 45”32.9 kW (44.1 hp)Traktorenlexikon, “Hanomag R 45 A/AE”Not comparableNot comparable on power at the PTO shaft: the G 45 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R 45 A/AE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the G 45 (S) and the R 45 A/AE.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the G 45 (S) and the R 45 A/AE.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the G 45 (S) and the R 45 A/AE.
Which lifts more on the three-point hitch?1,910 kg (4,211 lb)Traktorenlexikon, “Güldner G 45”1,400 kg (3,086 lb)Traktorenlexikon, “Hanomag R 45 A/AE”Not comparableNot comparable on three-point lift: the G 45 (S): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Güldner G 45”); the R 45 A/AE: lift at an unstated point, as stated by the source (Traktorenlexikon, “Hanomag R 45 A/AE”) — not the same quantity, basis and condition.
Which is heavier, for traction?2,095 kg (4,619 lb)Traktorenlexikon, “Güldner G 45”3,220 kg (7,099 lb) to 3,270 kg (7,209 lb)Traktorenlexikon, “Hanomag R 45 A/AE”Ahead (a fact, not an advantage)The Hanomag R 45 A/AE is 54% heavier (1,125 kg / 2,480 lb) than the Güldner G 45 (S) (both unladen weight, as stated by the source).
Which may carry more ballast and load?3,400 kg (7,496 lb)Traktorenlexikon, “Güldner G 45”4,000 kg (8,818 lb)Traktorenlexikon, “Hanomag R 45 A/AE”AheadThe Hanomag R 45 A/AE has 18% higher maximum permissible mass (600 kg / 1,323 lb) than the Güldner G 45 (S) (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?8Traktorenlexikon, “Güldner G 45”5Traktorenlexikon, “Hanomag R 45 A/AE”AheadThe Güldner G 45 (S) has 60% more forward gears (3 gears) than the Hanomag R 45 A/AE (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the G 45 (S) and the R 45 A/AE.
Which is faster on the road?20 km/h (12.4 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Güldner G 45”17.3 km/h (10.7 mph)Traktorenlexikon, “Hanomag R 45 A/AE”AheadThe Güldner G 45 (S) has 16% more top speed (2.7 km/h / 1.7 mph) than the Hanomag R 45 A/AE (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Güldner G 45”950Traktorenlexikon, “Hanomag R 45 A/AE”No figureNo call on PTO speeds: no standard PTO speed stated for the R 45 A/AE.
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Güldner G 45”—No figureNo call on PTO independence: not stated for the R 45 A/AE.
Which drives on both axles?2WDTraktorenlexikon, “Güldner G 45”2WDTraktorenlexikon, “Hanomag R 45 A/AE”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1965–19691950–1957Ahead (a fact, not an advantage)The Güldner G 45 (S) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Hanomag R 45 A/AE is 54% heavier (1,125 kg / 2,480 lb) than the Güldner G 45 (S) (both unladen weight, as stated by the source).
  • The Hanomag R 45 A/AE has 18% higher maximum permissible mass (600 kg / 1,323 lb) than the Güldner G 45 (S) (both maximum permissible mass, as stated by the source).
  • The Güldner G 45 (S) has 60% more forward gears (3 gears) than the Hanomag R 45 A/AE (both forward gears, as stated by the source).
  • The Güldner G 45 (S) has 16% more top speed (2.7 km/h / 1.7 mph) than the Hanomag R 45 A/AE (both top speed forward, as stated by the source).
  • The Güldner G 45 (S) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on drive: all two-wheel drive.
  • Not comparable on power at the PTO shaft: the G 45 (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the R 45 A/AE has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the G 45 (S): lift at the hitch ends, as stated by the source (Traktorenlexikon, “Güldner G 45”); the R 45 A/AE: lift at an unstated point, as stated by the source (Traktorenlexikon, “Hanomag R 45 A/AE”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources