Güldner G 40A (S) or Warchalowski WT-42 A?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the G 40A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-42 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Warchalowski WT-42A suits loader and hydraulic implement work better on this data: 18% (272 kg / 600 lb) more three-point lift.
  • The Warchalowski WT-42A suits road haulage better on this data: 45% (9.0 km/h / 5.6 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Güldner G 40A (S) and Warchalowski WT-42 A, with the call on each
QuestionG 40A (S)WT-42 ACall
Which puts more power through the PTO shaft?27.8 kW (37.3 hp)Traktorenlexikon, “Güldner G 40A”27.9 kW (37.4 hp)Traktorenlexikon, “Warchalowski WT 42”Not comparableNot comparable on power at the PTO shaft: the G 40A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-42 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the G 40A (S) and the WT-42 A.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the G 40A (S) and the WT-42 A.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the G 40A (S) and the WT-42 A.
Which lifts more on the three-point hitch?1,528 kg (3,369 lb)Traktorenlexikon, “Güldner G 40A”1,800 kg (3,968 lb)Traktorenlexikon, “Warchalowski WT 42”AheadThe Warchalowski WT-42A has 18% more lift (272 kg / 600 lb) than the Güldner G 40A (S) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,345 kg (5,170 lb)Traktorenlexikon, “Güldner G 40A”1,766 kg (3,893 lb)Traktorenlexikon, “Warchalowski WT 42”Ahead (a fact, not an advantage)The Güldner G 40A (S) is 33% heavier (579 kg / 1,276 lb) than the Warchalowski WT-42A (both unladen weight, as stated by the source).
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the G 40A (S) and the WT-42 A.
Which has the wider choice of gears?8Traktorenlexikon, “Güldner G 40A”8Traktorenlexikon, “Warchalowski WT 42”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?YesTraktorenlexikon, “Güldner G 40A”—No figureNo call on a creeper range: not stated for the WT-42 A.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Güldner G 40A”29 km/h (18.0 mph)Traktorenlexikon, “Warchalowski WT 42”AheadThe Warchalowski WT-42A has 45% more top speed (9.0 km/h / 5.6 mph) than the Güldner G 40A (S) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1150 rpmTraktorenlexikon, “Güldner G 40A”540 rpmTraktorenlexikon, “Warchalowski WT 42”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Güldner G 40A”—No figureNo call on PTO independence: not stated for the WT-42 A.
Which drives on both axles?4WDTraktorenlexikon, “Güldner G 40A”4WDTraktorenlexikon, “Warchalowski WT 42”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1963–19691964–1969EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Warchalowski WT-42A has 18% more lift (272 kg / 600 lb) than the Güldner G 40A (S) (both lift at the hitch ends, as stated by the source).
  • The Güldner G 40A (S) is 33% heavier (579 kg / 1,276 lb) than the Warchalowski WT-42A (both unladen weight, as stated by the source).
  • The Warchalowski WT-42A has 45% more top speed (9.0 km/h / 5.6 mph) than the Güldner G 40A (S) (both top speed forward, as stated by the source).
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the G 40A (S) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the WT-42 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources