Güldner G 40A (S) vs Volvo T-320

12 material differences

Tractor one

1963–1969

No measured PTO figure

Tractor two

1961–1964

No measured PTO figure

Which should you choose?

Read our verdict on the G 40A (S) and the T-320 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Güldner G 40A (S) and Volvo T-320, field by field
Field	G 40A (S)	T-320	Gap
Engine
Engine power, claimed claimed	37.3 hp	36.5 hp	—
Engine declared	Güldner 3 L 79	PERKINS D-913	differs
Displacement declared	2.36 L	2.50 L	+6% T-320
Maximum torque declared	95 lb·ft · 128 N·m	110 lb·ft · 149 N·m	+16% T-320
Transmission
Top speed declared	12.4 mph · 20 km/h	15.5 mph · 25 km/h	+25% T-320
Clutch declared	Pedal operated dry double clutch from Fichtel & Sachs	Pedal operated dry Borg & Beck single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	7.4 gpm · 27.9 L/min	—
Pressure declared	—	2,567 psi · 177 bar	—
Three-point lift at ends declared	3,369 lb · 1,528 kg	2,315 lb · 1,050 kg	+46% G 40A (S)
Rear PTO speeds declared	540/1150 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,170 lb · 2,345 kg	3,461 lb · 1,570 kg	+49% G 40A (S)
Wheelbase declared	76.9 in · 1,954 mm	76.9 in · 1,953 mm	—
Length declared	131.0 in · 3,328 mm	116.1 in · 2,950 mm	+13% G 40A (S)
Width declared	68.9 in · 1,750 mm	67.7 in · 1,720 mm	—
Height declared	60.9 in · 1,547 mm	83.5 in · 2,120 mm	+37% T-320
Ground clearance declared	15.2 in · 387 mm	16.5 in · 420 mm	+9% T-320
Turning radius, braked declared	10.3 ft · 3.15 m	10.2 ft · 3.10 m	—
Fuel tank declared	52.8 qt · 50 L	37.0 qt · 35.0 L	+43% G 40A (S)

Source

Source