9 material differences · fewer than 12

Tractor oneGüldner G 40A (S)1963–1969No measured PTO figureTractor twoKramer KL 4001960–1967No measured PTO figure

Which should you choose?

Read our verdict on the G 40A (S) and the KL 400 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Güldner G 40A (S) and Kramer KL 400, field by field
Field	G 40A (S)	KL 400	Gap
Engine
Engine power, claimed claimed	37.3 hp	37.3 hp	—
Engine declared	Güldner 3 L 79	12/1960 bis 2/1964 = KHD F3L 712	differs
Displacement declared	2.36 L	2.55 L	+8% KL 400
Maximum torque declared	95 lb·ft · 128 N·m	92 lb·ft · 125 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4–17.0 mph · 20.0–27.4 km/h	differs
Clutch declared	Pedal operated dry double clutch from Fichtel & Sachs	Double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	—	5.3 gpm · 20.0 L/min	—
Pressure declared	—	1,707 psi · 118 bar	—
Rear PTO speeds declared	540/1150 rpm	585 rpm	differs
Weight & dimensions
Unladen weight declared	5,170 lb · 2,345 kg	3,946–4,299 lb · 1,790–1,950 kg	differs
Maximum permissible mass declared	—	5,512 lb · 2,500 kg	—
Wheelbase declared	76.9 in · 1,954 mm	77.2–80.7 in · 1,960–2,050 mm	—
Length declared	131.0 in · 3,328 mm	124.0–130.9 in · 3,150–3,325 mm	differs
Width declared	68.9 in · 1,750 mm	62.6 in · 1,590 mm	+10% G 40A (S)
Height, over the steering wheel declared	60.9 in · 1,547 mm	63.0 in · 1,600 mm	—
Ground clearance declared	15.2 in · 387 mm	15.7 in · 400 mm	—
Turning radius, braked declared	10.3 ft · 3.15 m	—	—
Fuel tank declared	52.8 qt · 50 L	44.4 qt · 42 L	+19% G 40A (S)

Source

Source