Güldner G 40A (S) vs John Deere 60
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the G 40A (S) and the 60 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | G 40A (S) | 60 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 37.3 hp | 36.9 hp | — |
| Engine declared | Güldner 3 L 79 | — | — |
| Displacement declared | 2.36 L | — | — |
| Maximum torque declared | 95 lb·ft · 128 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 11.0 mph · 17.7 km/h | +13% G 40A (S) |
| Clutch declared | Pedal operated dry double clutch from Fichtel & Sachs | Pedal-operated dry single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.9 gpm · 33.7 L/min | — |
| Three-point lift at ends declared | 3,369 lb · 1,528 kg | — | — |
| Rear PTO speeds declared | 540/1150 rpm | 536 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,170 lb · 2,345 kg | 5,908 lb · 2,680 kg | +14% 60 |
| Wheelbase declared | 76.9 in · 1,954 mm | 90.0 in · 2,286 mm | +17% 60 |
| Length declared | 131.0 in · 3,328 mm | 139.0 in · 3,531 mm | +6% 60 |
| Width declared | 68.9 in · 1,750 mm | 86.6 in · 2,200 mm | +26% 60 |
| Height declared | 60.9 in · 1,547 mm | 65.6 in · 1,665 mm | +8% 60 |
| Ground clearance declared | 15.2 in · 387 mm | — | — |
| Turning radius, braked declared | 10.3 ft · 3.15 m | — | — |
| Fuel tank declared | 52.8 qt · 50 L | — | — |
Güldner G 40A (S) sources
Source
- Source: Traktorenlexikon, “Güldner G 40A”
- Source: Traktorenlexikon, “Güldner G 40 Toledo”
John Deere 60 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 60”