Güldner AF 30 P vs International Harvester D-430

8 material differences · fewer than 12

Tractor one

1948–1951

No measured PTO figure

Tractor two

1956–1962

No measured PTO figure

Which should you choose?

Read our verdict on the AF 30 P and the D-430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

Güldner AF 30 P and International Harvester D-430, field by field
Field	AF 30 P	D-430	Gap
Engine
Engine power, claimed claimed	29.5 hp	29.6 hp	—
Engine declared	Güldner 2F	INTERNATIONAL-HARVESTER DD-132	differs
Displacement declared	2.60 L	2.18 L	+19% AF 30 P
Maximum torque declared	110 lb·ft · 150 N·m	90 lb·ft · 122 N·m	+23% AF 30 P
Transmission
Top speed declared	12.4 mph · 20 km/h	12.4 mph · 20 km/h	—
Clutch declared	Single plate dry clutch from Fichtel & Sachs	Foot-operated dry single-plate clutch from Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	—	4.1 gpm · 15.5 L/min	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	4,497 lb · 2,040 kg	3,660 lb · 1,660 kg	+23% AF 30 P
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	70.5 in · 1,790 mm	74.0 in · 1,880 mm	—
Length declared	115.0 in · 2,920 mm	115.4 in · 2,930 mm	—
Width declared	64.6 in · 1,640 mm	64.6 in · 1,640 mm	—
Height declared	66.1 in · 1,680 mm	61.0 in · 1,550 mm	+8% AF 30 P
Ground clearance declared	13.0 in · 330 mm	15.2 in · 385 mm	+17% D-430
Turning radius, braked declared	—	9.2 ft · 2.80 m	—
Fuel tank declared	44.4 qt · 42 L	31.7–58.1 qt · 30.0–55.0 L	differs

Source

Source