8 material differences · fewer than 12

Tractor oneGüldner AF 301948–1951No measured PTO figureTractor twoLanz D 85391934–1939No measured PTO figure

Which should you choose?

Read our verdict on the AF 30 and the D 8539 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 1 fields identical or within 5%, which is not counted as material

Güldner AF 30 and Lanz D 8539, field by field
FieldAF 30D 8539Gap
Engine
Engine power, claimed claimed30 hp29.5 hp—
Engine declaredGüldner 2F——
Displacement declared2.60 L——
Maximum torque declared110 lb·ft · 150 N·m——
Transmission
Top speed declared12.4 mph · 20 km/h13.4 mph · 21.5 km/h+8% D 8539
Clutch declaredSingle-plate dry clutch from Fichtel & Sachspedal-operated three-jaw clutch with clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared540 rpm——
Weight & dimensions
Unladen weight declared4,497 lb · 2,040 kg9,149 lb · 4,150 kg+103% D 8539
Wheelbase declared70.5 in · 1,790 mm76.4–77.8 in · 1,940–1,975 mmdiffers
Length declared115.0 in · 2,920 mm129.9 in · 3,300 mm+13% D 8539
Width declared64.6 in · 1,640 mm70.9 in · 1,800 mm+10% D 8539
Ground clearance declared13.0 in · 330 mm9.4–10.6 in · 240–270 mmdiffers
Fuel tank declared44.4 qt · 42 L95.1–100.4 qt · 90–95 Ldiffers

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Güldner AF 30 sources

Source
  • Source: Traktorenlexikon, “Güldner AF 30”

Lanz D 8539 sources

Source
  • Source: Traktorenlexikon, “Lanz D 8539”