Güldner AF 30 vs International Harvester D-430
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the AF 30 and the D-430 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | AF 30 | D-430 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 30 hp | 29.6 hp | — |
| Engine declared | Güldner 2F | INTERNATIONAL-HARVESTER DD-132 | differs |
| Displacement declared | 2.60 L | 2.18 L | +19% AF 30 |
| Maximum torque declared | 110 lb·ft · 150 N·m | 90 lb·ft · 122 N·m | +23% AF 30 |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | Single-plate dry clutch from Fichtel & Sachs | Foot-operated dry single-plate clutch from Fichtel & Sachs | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.1 gpm · 15.5 L/min | — |
| Three-point lift at ends declared | — | 1,323 lb · 600 kg | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,497 lb · 2,040 kg | 3,660 lb · 1,660 kg | +23% AF 30 |
| Maximum permissible mass declared | — | 4,409 lb · 2,000 kg | — |
| Wheelbase declared | 70.5 in · 1,790 mm | 74.0 in · 1,880 mm | — |
| Length declared | 115.0 in · 2,920 mm | 115.4 in · 2,930 mm | — |
| Width declared | 64.6 in · 1,640 mm | 64.6 in · 1,640 mm | — |
| Height declared | 66.1 in · 1,680 mm | 61.0 in · 1,550 mm | +8% AF 30 |
| Ground clearance declared | 13.0 in · 330 mm | 15.2 in · 385 mm | +17% D-430 |
| Turning radius, braked declared | — | 9.2 ft · 2.80 m | — |
| Fuel tank declared | 44.4 qt · 42 L | 31.7–58.1 qt · 30.0–55.0 L | differs |
Güldner AF 30 sources
Source
- Source: Traktorenlexikon, “Güldner AF 30”
International Harvester D-430 sources
Source
- Source: Traktorenlexikon, “McCormick D-430 Farmall”
- Source: Traktorenlexikon, “McCormick DGD 4”