11 material differences · fewer than 12
Tractor oneGüldner A 3 KTA (Burgund-T)1962–1965No measured PTO figureTractor twoSteyr 1881960–1966No measured PTO figure
Which should you choose?
Read our verdict on the A 3 KTA (Burgund-T) and the 188 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | A 3 KTA (Burgund-T) | 188 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 27.6 hp | +13% 188 |
| Engine declared | Güldner 3 LKA | Steyr WD-209 | differs |
| Displacement declared | 1.32 L | 1.99 L | +51% 188 |
| Maximum torque declared | 59 lb·ft · 79 N·m | 87 lb·ft · 118 N·m | +49% 188 |
| Transmission | |||
| Top speed declared | 12.2 mph · 19.7 km/h | 18.6 mph · 30 km/h | +52% 188 |
| Clutch declared | Pedal operated dry double clutch by Fichtel & Sachs | Pedal-operated dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | 2,134 psi · 147 bar | 2,134 psi · 147 bar | — |
| Rear PTO speeds declared | 546 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,197 lb · 1,450 kg | 3,064 lb · 1,390 kg | — |
| Wheelbase declared | 78.7 in · 2,000 mm | 72.8 in · 1,850 mm | +8% A 3 KTA (Burgund-T) |
| Length declared | 133.1 in · 3,380 mm | 124.4 in · 3,160 mm | +7% A 3 KTA (Burgund-T) |
| Width declared | 59.8 in · 1,520 mm | 64.7 in · 1,644 mm | +8% 188 |
| Ground clearance declared | — | 17.3 in · 440 mm | — |
| Turning radius, braked declared | 9.2 ft · 2.80 m | 9.7 ft · 2.95 m | +5% 188 |
| Fuel tank declared | 33.8 qt · 32 L | 42.3 qt · 40 L | +25% 188 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Güldner A 3 KTA (Burgund-T) sources
- Source: Traktorenlexikon, “Güldner A 3 KTA Burgund”
Steyr 188 sources
- Source: Traktorenlexikon, “Steyr 188”