Güldner A 3 KTA (Burgund-T) or International Harvester 323?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Güldner A 3 KTA (Burgund-T) and International Harvester 323, with the call on each
QuestionA 3 KTA (Burgund-T)323Call
Which puts more power through the PTO shaft?17.6 kW (23.6 hp)Traktorenlexikon, “Güldner A 3 KTA Burgund”17.5 kW (23.5 hp)Traktorenlexikon, “McCormick 323”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the A 3 KTA (Burgund-T) and the 323.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the A 3 KTA (Burgund-T) and the 323.
Which pumps more oil for implements?25.0 L/min (6.6 gpm)Traktorenlexikon, “McCormick 323”No figureNo call on hydraulic flow: no figure on record for the A 3 KTA (Burgund-T).
Which lifts more on the three-point hitch?900 kg (1,984 lb)Traktorenlexikon, “Güldner A 3 KTA Burgund”No figureNo call on three-point lift: no figure on record for the 323.
Which is heavier, for traction?1,450 kg (3,197 lb)Traktorenlexikon, “Güldner A 3 KTA Burgund”1,876 kg (4,136 lb)Traktorenlexikon, “McCormick 323”Ahead (a fact, not an advantage)The International Harvester 323 is 29% heavier (426 kg / 939 lb) than the Güldner A 3 KTA (Burgund-T) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the A 3 KTA (Burgund-T) and the 323.
Which has the wider choice of gears?8Traktorenlexikon, “Güldner A 3 KTA Burgund”8 to 16Traktorenlexikon, “McCormick 323”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?YesTraktorenlexikon, “Güldner A 3 KTA Burgund”No figureNo call on a creeper range: not stated for the 323.
Which is faster on the road?19.7 km/h (12.2 mph)Traktorenlexikon, “Güldner A 3 KTA Burgund”20 km/h (12.4 mph)Traktorenlexikon, “McCormick 323”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?546 rpmTraktorenlexikon, “Güldner A 3 KTA Burgund”540 rpmTraktorenlexikon, “McCormick 323”No figureNo call on PTO speeds: no standard PTO speed stated for the A 3 KTA (Burgund-T).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Güldner A 3 KTA Burgund”independentTraktorenlexikon, “McCormick 323”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Güldner A 3 KTA Burgund”2WDTraktorenlexikon, “McCormick 323”EvenEven on drive: all two-wheel drive.
Which is newer, and what about parts?1962–19651966–1974EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The International Harvester 323 is 29% heavier (426 kg / 939 lb) than the Güldner A 3 KTA (Burgund-T) (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: all two-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO speeds.

← Every figure for both machines, side by side, with sources