7 material differences · fewer than 12
Tractor oneGüldner A 3 K Burgund1959–1962No measured PTO figureTractor twoKramer KWD 2501958–1959No measured PTO figure
Which should you choose?
Read our verdict on the A 3 K Burgund and the KWD 250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | A 3 K Burgund | KWD 250 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 24.5 hp | 24 hp | — |
| Engine declared | Güldner 3 LKN | Güldner 2 BS | differs |
| Displacement declared | 1.32 L | 1.84 L | +39% KWD 250 |
| Maximum torque declared | — | 72 lb·ft · 98 N·m | — |
| Transmission | |||
| Top speed declared | 11.6 mph · 18.6 km/h | 12.3 mph · 19.8 km/h | +6% KWD 250 |
| Clutch declared | Pedal operated dry double clutch by Fichtel & Sachs | Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 4.2 gpm · 16.0 L/min | — |
| Pressure declared | — | 1,707 psi · 118 bar | — |
| Rear PTO speeds declared | 546 rpm | 528 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,230 lb · 1,465 kg | 3,417 lb · 1,550 kg | +6% KWD 250 |
| Maximum permissible mass declared | — | 3,968 lb · 1,800 kg | — |
| Wheelbase declared | 74.3 in · 1,886 mm | 74.3 in · 1,887 mm | — |
| Length declared | 123.6 in · 3,140 mm | 116.1 in · 2,950 mm | +6% A 3 K Burgund |
| Width declared | 60.0 in · 1,524 mm | 62.2 in · 1,580 mm | — |
| Ground clearance declared | 14.8 in · 376 mm | 15.0 in · 380 mm | — |
| Turning radius, braked declared | 8.7 ft · 2.65 m | — | — |
| Fuel tank declared | — | 38.0 qt · 36 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Güldner A 3 K Burgund sources
- Source: Traktorenlexikon, “Güldner A 3 K Burgund”
- Source: Traktorenlexikon, “Fahr D 133 N”
Kramer KWD 250 sources
- Source: Traktorenlexikon, “Kramer KWD 250”
- Source: Traktorenlexikon, “Güldner AB”