6 material differences · fewer than 12

Tractor oneGüldner A 281946–1950No measured PTO figureTractor twoLanz D 70061943–1945No measured PTO figure

Which should you choose?

Read our verdict on the A 28 and the D 7006 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 2 fields identical or within 5%, which is not counted as material

Güldner A 28 and Lanz D 7006, field by field
FieldA 28D 7006Gap
Engine
Engine power, claimed claimed27.6 hp24.5 hp+13% A 28
Engine declaredGüldner 2F——
Displacement declared2.60 L——
Maximum torque declared110 lb·ft · 150 N·m——
Transmission
Top speed declared12.4 mph · 20 km/h9.4 mph · 15.1 km/h+32% A 28
Clutch declaredSingle-plate dry clutchPedal operated three-shoe clutch with clutch brakediffers
Hydraulics & hitch
Rear PTO speeds declared540 rpm850differs
Weight & dimensions
Unladen weight declared4,023 lb · 1,825 kg5,203 lb · 2,360 kg+29% D 7006
Wheelbase declared70.5 in · 1,790 mm66.5 in · 1,690 mm+6% A 28
Length declared115.0 in · 2,920 mm130.7 in · 3,320 mm+14% D 7006
Width declared64.6 in · 1,640 mm63.0 in · 1,600 mm—
Ground clearance declared13.0 in · 330 mm13.0 in · 330 mm—
Fuel tank declared44.4 qt · 42 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Güldner A 28 sources

Source
  • Source: Traktorenlexikon, “Güldner A 28”
  • Source: Traktorenlexikon, “Güldner AF 30”

Lanz D 7006 sources

Source
  • Source: Traktorenlexikon, “Lanz D 7006 Reingas”