Güldner A 2 BL vs SOMECA 250 (DT)

9 material differences · fewer than 12

Tractor one

1959–1960

No measured PTO figure

Tractor two

1968–1971

No measured PTO figure

Which should you choose?

Read our verdict on the A 2 BL and the 250 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Güldner A 2 BL and SOMECA 250 (DT), field by field
Field	A 2 BL	250 (DT)	Gap
Engine
Engine power, claimed claimed	24.5 hp	24.7 hp	—
Engine declared	Güldner 2 LB	FIAT-TRATTORI 852 A	differs
Displacement declared	1.84 L	1.56 L	+18% A 2 BL
Maximum torque declared	72 lb·ft · 98 N·m	58 lb·ft · 79 N·m	+24% A 2 BL
Transmission
Top speed declared	11.8 mph · 19.0 km/h	15.5 mph · 25 km/h	+32% 250 (DT)
Clutch declared	Pedal operated dry Fichtel & Sachs single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	—	2.5 gpm · 9.3 L/min	—
Pressure declared	1,991 psi · 137 bar	—	—
Three-point lift at ends declared	—	1,323 lb · 600 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,219 lb · 1,460 kg	2,359 lb · 1,070 kg	+36% A 2 BL
Maximum permissible mass declared	4,409 lb · 2,000 kg	—	—
Wheelbase declared	78.0 in · 1,980 mm	66.9 in · 1,700 mm	+16% A 2 BL
Length declared	123.5 in · 3,138 mm	115.4 in · 2,930 mm	+7% A 2 BL
Width declared	59.1 in · 1,500 mm	57.7 in · 1,465 mm	—
Height declared	63.0 in · 1,600 mm	61.8 in · 1,570 mm	—
Ground clearance declared	16.1 in · 410 mm	18.5 in · 470 mm	+15% 250 (DT)
Turning radius, braked declared	—	9.2 ft · 2.80 m	—
Fuel tank declared	37.0 qt · 35 L	30.6 qt · 29.0 L	+21% A 2 BL

Source

Source