Fordson New Major (E1A) or International Harvester D-440?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the New Major (E1A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-440 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The International Harvester D-440 suits loader and hydraulic implement work better on this data: 30% (5.5 L/min / 1.5 gpm) more hydraulic flow and 111% (1,050 kg / 2,315 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | New Major (E1A) | D-440 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 29.4 kW (39.4 hp)Traktorenlexikon, “Fordson New Major” | 29.4 kW (39.4 hp)Traktorenlexikon, “McCormick D-440 Standard” | Not comparableNot comparable on power at the PTO shaft: the New Major (E1A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-440 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the New Major (E1A) and the D-440. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the New Major (E1A) and the D-440. |
| Which pumps more oil for implements? | 18.5 L/min (4.9 gpm)Traktorenlexikon, “Fordson New Major” | 24.0 L/min (6.3 gpm)Traktorenlexikon, “McCormick D-440 Standard” | AheadThe International Harvester D-440 has 30% more hydraulic flow (5.5 L/min / 1.5 gpm) than the Fordson New Major (E1A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 950 kg (2,094 lb)Traktorenlexikon, “Fordson New Major” | 2,000 kg (4,409 lb)Traktorenlexikon, “McCormick D-440 Standard” | AheadThe International Harvester D-440 has 111% more lift (1,050 kg / 2,315 lb) than the Fordson New Major (E1A) (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 2,070 kg (4,564 lb)Traktorenlexikon, “Fordson New Major” | 1,940 kg (4,277 lb)Traktorenlexikon, “McCormick D-440 Standard” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 3,190 kg (7,033 lb)Traktorenlexikon, “McCormick D-440 Standard” | No figureNo call on maximum permissible mass: no figure on record for the New Major (E1A). |
| Which has the wider choice of gears? | 6Traktorenlexikon, “Fordson New Major” | 8Traktorenlexikon, “McCormick D-440 Standard” | AheadThe International Harvester D-440 has 33% more forward gears (2 gears) than the Fordson New Major (E1A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the New Major (E1A) and the D-440. |
| Which is faster on the road? | 22 km/h (13.7 mph)Traktorenlexikon, “Fordson New Major” | 20 km/h (12.4 mph)Traktorenlexikon, “McCormick D-440 Standard” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 542 rpmTraktorenlexikon, “Fordson New Major” | 540 rpmTraktorenlexikon, “McCormick D-440 Standard” | No figureNo call on PTO speeds: no standard PTO speed stated for the New Major (E1A). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “McCormick D-440 Standard” | No figureNo call on PTO independence: not stated for the New Major (E1A). |
| Which drives on both axles? | 2WDTraktorenlexikon, “Fordson New Major” | 2WDTraktorenlexikon, “McCormick D-440 Standard” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1951–1958 | 1958–1959 | Ahead (a fact, not an advantage)The International Harvester D-440 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The International Harvester D-440 has 30% more hydraulic flow (5.5 L/min / 1.5 gpm) than the Fordson New Major (E1A) (both pump flow, as stated by the source).
- The International Harvester D-440 has 111% more lift (1,050 kg / 2,315 lb) than the Fordson New Major (E1A) (both lift at the hitch ends, as stated by the source).
- The International Harvester D-440 has 33% more forward gears (2 gears) than the Fordson New Major (E1A) (both forward gears, as stated by the source).
- The International Harvester D-440 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: all two-wheel drive.
- Not comparable on power at the PTO shaft: the New Major (E1A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D-440 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range, PTO speeds and PTO independence.
← Every figure for both machines, side by side, with sources