9 material differences · fewer than 12
Tractor oneFordson Dexta (957 E)1957–1964No measured PTO figureTractor twoHanomag Perfekt 401 (S)1964–1967No measured PTO figure
Which should you choose?
Read our verdict on the Dexta (957 E) and the Perfekt 401 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Dexta (957 E) | Perfekt 401 (S) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 30.6 hp | 31 hp | — |
| Engine declared | PERKINS/FORD F 3.144 | Hanomag-Borgward D 301 R | differs |
| Displacement declared | 2.37 L | 1.80 L | +32% Dexta (957 E) |
| Maximum torque declared | — | 73 lb·ft · 99 N·m | — |
| Transmission | |||
| Top speed declared | 14.3 mph · 23 km/h | 12.4 mph · 20 km/h | +15% Dexta (957 E) |
| Clutch declared | — | dual clutch by Fichtel & Sachs | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.1 gpm · 19.4 L/min | 5.0 gpm · 19.0 L/min | — |
| Pressure declared | 2,489 psi · 172 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,241 lb · 1,470 kg | 3,924 lb · 1,780 kg | +21% Perfekt 401 (S) |
| Maximum permissible mass declared | 4,409 lb · 2,000 kg | — | — |
| Wheelbase declared | 73.5 in · 1,867 mm | 80.1 in · 2,035 mm | +9% Perfekt 401 (S) |
| Length declared | 118.5 in · 3,010 mm | 133.1 in · 3,380 mm | +12% Perfekt 401 (S) |
| Width declared | 65.4 in · 1,660 mm | 62.2 in · 1,580 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 15.7 in · 400 mm | +33% Dexta (957 E) |
| Turning radius, braked declared | 8.5 ft · 2.59 m | 11.2 ft · 3.40 m | +31% Perfekt 401 (S) |
| Fuel tank declared | 33.6 qt · 31.8 L | 49.7 qt · 47 L | +48% Perfekt 401 (S) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fordson Dexta (957 E) sources
- Source: Traktorenlexikon, “Fordson Dexta”
Hanomag Perfekt 401 (S) sources
- Source: Traktorenlexikon, “Hanomag Perfekt 401 (S)”