12 material differences

Tractor oneFordson Dexta-Special1963–1964No measured PTO figureTractor twoHanomag Perfekt 401 (S)1964–1967No measured PTO figure

Which should you choose?

Read our verdict on the Dexta-Special and the Perfekt 401 (S) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Fordson Dexta-Special and Hanomag Perfekt 401 (S), field by field
FieldDexta-SpecialPerfekt 401 (S)Gap
Engine
Engine power, claimed claimed30.6 hp31 hp—
Engine declaredPERKINS/FORD F 3.144Hanomag-Borgward D 301 Rdiffers
Displacement declared2.37 L1.80 L+32% Dexta-Special
Maximum torque declared94 lb·ft · 127 N·m73 lb·ft · 99 N·m+28% Dexta-Special
Transmission
Top speed declared12.4 mph · 20 km/h12.4 mph · 20 km/h—
Clutch declaredPedal-operated dry single-plate clutchdual clutch by Fichtel & Sachsdiffers
Hydraulics & hitch
Pump flow declared4.4 gpm · 16.7 L/min5.0 gpm · 19.0 L/min+14% Perfekt 401 (S)
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,241 lb · 1,470 kg3,924 lb · 1,780 kg+21% Perfekt 401 (S)
Maximum permissible mass declared4,409 lb · 2,000 kg——
Wheelbase declared73.5 in · 1,867 mm80.1 in · 2,035 mm+9% Perfekt 401 (S)
Length declared118.5 in · 3,010 mm133.1 in · 3,380 mm+12% Perfekt 401 (S)
Width declared64.6–86.6 in · 1,640–2,200 mm62.2 in · 1,580 mmdiffers
Ground clearance declared20.9 in · 530 mm15.7 in · 400 mm+33% Dexta-Special
Turning radius, braked declared9.0 ft · 2.75 m11.2 ft · 3.40 m+24% Perfekt 401 (S)
Fuel tank declared33.6 qt · 31.8 L49.7 qt · 47 L+48% Perfekt 401 (S)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fordson Dexta-Special sources

Source
  • Source: Traktorenlexikon, “Fordson Dexta-Spezial”
  • Source: Traktorenlexikon, “Fordson Dexta”

Hanomag Perfekt 401 (S) sources

Source
  • Source: Traktorenlexikon, “Hanomag Perfekt 401 (S)”