7 material differences · fewer than 12
Tractor oneFord TW-30 (A)1979–1983No measured PTO figureTractor twoWHITE 4-1751979–1983No measured PTO figure
Which should you choose?
Read our verdict on the TW-30 (A) and the 4-175 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | TW-30 (A) | 4-175 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 174.6 hp | 174.6 hp | — |
| Engine declared | Ford 401 DF-TI | CATERPILLAR 3208/V-8 | differs |
| Displacement declared | 6.58 L | 10.43 L | +58% 4-175 |
| Maximum torque declared | 494 lb·ft · 670 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | pedal-operated dry single-plate clutch | Pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | — | 22.0 gpm · 83.3 L/min | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 14,625 lb · 6,634 kg | 16,535 lb · 7,500 kg | +13% 4-175 |
| Maximum permissible mass declared | 19,820 lb · 8,990 kg | — | — |
| Wheelbase declared | 110.5 in · 2,807 mm | 118.4 in · 3,007 mm | +7% 4-175 |
| Length declared | 190.9 in · 4,849 mm | 244.0 in · 6,198 mm | +28% 4-175 |
| Width declared | 83.6 in · 2,124 mm | 80.6 in · 2,048 mm | — |
| Ground clearance declared | 25.2 in · 640 mm | 27.3 in · 694 mm | +8% 4-175 |
| Turning radius, braked declared | 13.3 ft · 4.06 m | — | — |
| Fuel tank declared | 299.9 qt · 283.8 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford TW-30 (A) sources
- Source: Traktorenlexikon, “Ford TW 30”
WHITE 4-175 sources
- Source: Traktorenlexikon, “White 4-175”
- Source: Traktorenlexikon, “White 2-180”