6 material differences · fewer than 12

Tractor oneFord 90001969–1972No measured PTO figureTractor twoInternational Harvester 14561969–1971No measured PTO figure

Which should you choose?

Read our verdict on the 9000 and the 1456 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 9000 and International Harvester 1456, field by field
Field90001456Gap
Engine
Engine power, claimed claimed145.0 hp132.2 hp+10% 9000
Engine declaredFord 401INTERNATIONAL HARVESTER DT-407differs
Displacement declared6.58 L6.67 L—
Maximum torque declared372 lb·ft · 504 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declared—Pedal operated dry single plate clutch—
Hydraulics & hitch
Pump flow declared16.0 gpm · 60.6 L/min——
Rear PTO speeds declared1000 rpm1000 rpm—
Weight & dimensions
Unladen weight declared9,800 lb · 4,445 kg12,800 lb · 5,806 kg+31% 1456
Wheelbase declared91.5 in · 2,324 mm104.8 in · 2,662 mm+15% 1456
Length declared151.0 in · 3,835 mm164.0 in · 4,166 mm+9% 1456
Width declared91.1 in · 2,314 mm92.0 in · 2,337 mm—
Ground clearance declared25.3 in · 643 mm23.5 in · 597 mm+8% 9000
Turning radius, braked declared11.0 ft · 3.35 m11.7 ft · 3.56 m+6% 1456
Fuel tank declared172.0 qt · 162.8 L168.0 qt · 159.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 9000 sources

Source
  • Source: Traktorenlexikon, “Ford 9000”
  • Source: Traktorenlexikon, “Ford 8730”

International Harvester 1456 sources

Source
  • Source: Traktorenlexikon, “IHC 1456”
  • Source: Traktorenlexikon, “IHC 1026”