7 material differences · fewer than 12
Tractor oneFord 8 N1947–1952No measured PTO figureTractor twoLanz D 75061934–1935No measured PTO figure
Which should you choose?
Read our verdict on the 8 N and the D 7506 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 8 N | D 7506 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 25.6 hp | 19.6 hp | +31% 8 N |
| Transmission | |||
| Top speed declared | 13.0 mph · 21 km/h | 9.4 mph · 15.2 km/h | +38% 8 N |
| Clutch declared | Pedal operated dry single disc clutch | Pedal operated three-shoe clutch including clutch brake | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 3.4 gpm · 13.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 760 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,714 lb · 1,231 kg | 6,173 lb · 2,800 kg | +127% D 7506 |
| Wheelbase declared | 70.0 in · 1,778 mm | 66.3 in · 1,683 mm | +6% 8 N |
| Length declared | 115.0 in · 2,921 mm | 112.0 in · 2,845 mm | — |
| Width declared | 64.8 in · 1,645 mm | 62.9 in · 1,598 mm | — |
| Ground clearance declared | 21.0 in · 533 mm | 10.6 in · 270 mm | +97% 8 N |
| Turning radius, braked declared | 8.0 ft · 2.44 m | — | — |
| Fuel tank declared | 48.1 qt · 45.5 L | 52.8 qt · 50 L | +10% D 7506 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 8 N sources
Source
- Source: Traktorenlexikon, “Ford 8N”
Lanz D 7506 sources
Source
- Source: Traktorenlexikon, “Lanz D 7506/2”