Ford 8970 or Massey Ferguson MF 8280 A?
Which should you choose?
On performance, every comparable figure that differs favours the Massey Ferguson MF 8280 A: hydraulic flow and three-point lift. It is also ahead on PTO speeds.
- The Massey Ferguson MF 8280 A suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The Massey Ferguson MF 8280 A suits loader and hydraulic implement work better on this data: 21% (26.8 L/min / 7.1 gpm) more hydraulic flow and 13% (1,221 kg / 2,692 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8970 | MF 8280 A | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 167.4 kW (224.5 hp)Traktorenlexikon, “Ford 8970” | 172.5 kW (231.3 hp)Traktorenlexikon, “Massey Ferguson MF 8280” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8970 and the MF 8280 A. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8970 and the MF 8280 A. |
| Which pumps more oil for implements? | 126.8 L/min (33.5 gpm)Traktorenlexikon, “Ford 8970” | 153.6 L/min (40.6 gpm)Traktorenlexikon, “Massey Ferguson MF 8280” | AheadThe Massey Ferguson MF 8280 A has 21% more hydraulic flow (26.8 L/min / 7.1 gpm) than the Ford 8970 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,180 kg (20,238 lb)Traktorenlexikon, “Ford 8970” | 10,401 kg (22,931 lb)Traktorenlexikon, “Massey Ferguson MF 8280” | AheadThe Massey Ferguson MF 8280 A has 13% more lift (1,221 kg / 2,692 lb) than the Ford 8970 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 8,685 kg (19,147 lb)Traktorenlexikon, “Ford 8970” | 9,770 kg (21,539 lb)Traktorenlexikon, “Massey Ferguson MF 8280” | Ahead (a fact, not an advantage)The Massey Ferguson MF 8280 A is 12% heavier (1,085 kg / 2,392 lb) than the Ford 8970 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 13,650 kg (30,093 lb)Traktorenlexikon, “Ford 8970” | 14,000 kg (30,865 lb)Traktorenlexikon, “Massey Ferguson MF 8280” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “Ford 8970” | 18Traktorenlexikon, “Massey Ferguson MF 8280” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8970 and the MF 8280 A. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Ford 8970” | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 8280” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Ford 8970” | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 8280” | AheadThe Massey Ferguson MF 8280 A offers 540 rpm at the PTO, which the Ford 8970 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Massey Ferguson MF 8280” | No figureNo call on PTO independence: not stated for the 8970. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Ford 8970” | 4WDTraktorenlexikon, “Massey Ferguson MF 8280” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1999 | 1999–2002 | Ahead (a fact, not an advantage)The Massey Ferguson MF 8280 A is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 8280 A has 21% more hydraulic flow (26.8 L/min / 7.1 gpm) than the Ford 8970 (both pump flow, as stated by the source).
- The Massey Ferguson MF 8280 A has 13% more lift (1,221 kg / 2,692 lb) than the Ford 8970 (both lift at the hitch ends, as stated by the source).
- The Massey Ferguson MF 8280 A is 12% heavier (1,085 kg / 2,392 lb) than the Ford 8970 (both unladen weight, as stated by the source).
- The Massey Ferguson MF 8280 A offers 540 rpm at the PTO, which the Ford 8970 does not (as stated by the sources).
- The Massey Ferguson MF 8280 A is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources