Ford 8830 or Ford TW-35?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 8830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TW-35 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Ford TW-35 suits loader and hydraulic implement work better on this data: 12% (486 kg / 1,071 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 8830 | TW-35 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 136.8 kW (183.5 hp)Traktorenlexikon, “Ford 8830” | 136.8 kW (183.5 hp)Traktorenlexikon, “Ford TW 35” | Not comparableNot comparable on power at the PTO shaft: the 8830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TW-35 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 8830 and the TW-35. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 8830 and the TW-35. |
| Which pumps more oil for implements? | 109.8 L/min (29.0 gpm)Traktorenlexikon, “Ford 8830” | — | No figureNo call on hydraulic flow: no figure on record for the TW-35. |
| Which lifts more on the three-point hitch? | 4,070 kg (8,973 lb)Traktorenlexikon, “Ford 8830” | 4,556 kg (10,044 lb)Traktorenlexikon, “Ford TW 35” | AheadThe Ford TW-35 has 12% more lift (486 kg / 1,071 lb) than the Ford 8830 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 7,120 kg (15,697 lb)Traktorenlexikon, “Ford 8830” | 7,412 kg (16,341 lb)Traktorenlexikon, “Ford TW 35” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 11,400 kg (25,133 lb)Traktorenlexikon, “Ford 8830” | — | No figureNo call on maximum permissible mass: no figure on record for the TW-35. |
| Which has the wider choice of gears? | 16 to 18Traktorenlexikon, “Ford 8830” | 16Traktorenlexikon, “Ford TW 35” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 8830 and the TW-35. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Ford 8830” | 30 km/h (18.6 mph)Traktorenlexikon, “Ford TW 35” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Ford 8830” | 540/1000 rpmTraktorenlexikon, “Ford TW 35” | AheadThe Ford TW-35 offers 540 rpm at the PTO, which the Ford 8830 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “Ford TW 35” | No figureNo call on PTO independence: not stated for the 8830. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Ford 8830” | Two-wheel or four-wheel driveTraktorenlexikon, “Ford TW 35” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1989–1994 | 1983–1989 | Ahead (a fact, not an advantage)The Ford 8830 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Ford TW-35 has 12% more lift (486 kg / 1,071 lb) than the Ford 8830 (both lift at the hitch ends, as stated by the source).
- The Ford TW-35 offers 540 rpm at the PTO, which the Ford 8830 does not (as stated by the sources).
- The Ford 8830 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the 8830 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TW-35 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources