9 material differences · fewer than 12
Tractor oneFord 87301989–1994No measured PTO figureTractor twoWHITE 4-1501974–1978No measured PTO figure
Which should you choose?
Read our verdict on the 8730 and the 4-150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8730 | 4-150 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 151.9 hp | 151.9 hp | — |
| Engine declared | Ford 401 | CATERPILLAR 3208/V-8 | differs |
| Displacement declared | 6.58 L | 10.43 L | +58% 4-150 |
| Maximum torque declared | 387 lb·ft · 525 N·m | 409 lb·ft · 555 N·m | +6% 4-150 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Pump flow declared | 28.3 gpm · 107.1 L/min | 20.0 gpm · 75.7 L/min | +41% 8730 |
| Pressure declared | 2,045 psi · 141 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 14,859 lb · 6,740 kg | 14,500 lb · 6,577 kg | — |
| Maximum permissible mass declared | 25,133 lb · 11,400 kg | — | — |
| Wheelbase declared | 110.8 in · 2,814 mm | 115.6 in · 2,936 mm | — |
| Length declared | 193.4 in · 4,913 mm | 236.0 in · 5,994 mm | +22% 4-150 |
| Width declared | 104.5–137.4 in · 2,655–3,490 mm | 80.6 in · 2,048 mm | differs |
| Ground clearance declared | 18.2 in · 462 mm | 27.4 in · 696 mm | +51% 4-150 |
| Fuel tank declared | 400.5 qt · 379.0 L | 376.2 qt · 356.0 L | +6% 8730 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 8730 sources
Source
- Source: Traktorenlexikon, “Ford 8730”
WHITE 4-150 sources
Source
- Source: Traktorenlexikon, “White 4-150”
- Source: Traktorenlexikon, “White 2-180”