10 material differences · fewer than 12
Tractor oneFord 86301989–1994No measured PTO figureTractor twoLandini 14.500 (DT) "TL 24 N/G"1978–1993No measured PTO figure
Which should you choose?
Read our verdict on the 8630 and the 14.500 (DT) "TL 24 N/G" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 8630 | 14.500 (DT) "TL 24 N/G" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 130.2 hp | 130.2 hp | — |
| Engine declared | Ford 401 | Perkins AT 6.354.4 | differs |
| Displacement declared | 6.57 L | 5.80 L | +13% 8630 |
| Maximum torque declared | 347 lb·ft · 471 N·m | 359 lb·ft · 487 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | electro-hydraulically operated FUNK multi-disc clutch | Pedal-operated dry LUK double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.3 gpm · 107.1 L/min | 16.4 gpm · 62.0 L/min | +73% 8630 |
| Pressure declared | 2,799 psi · 193 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,400 lb · 8,346 kg | 11,530 lb · 5,230 kg | +60% 8630 |
| Maximum permissible mass declared | 23,091 lb · 10,474 kg | — | — |
| Wheelbase declared | 105.0 in · 2,667 mm | 111.8 in · 2,840 mm | +6% 14.500 (DT) "TL 24 N/G" |
| Length declared | 206.4 in · 5,243 mm | 183.5 in · 4,660 mm | +13% 8630 |
| Width declared | 83.6 in · 2,123 mm | 91.7 in · 2,330 mm | +10% 14.500 (DT) "TL 24 N/G" |
| Ground clearance declared | 15.5 in · 394 mm | 20.1 in · 510 mm | +29% 14.500 (DT) "TL 24 N/G" |
| Fuel tank declared | 232.5–401.5 qt · 220.0–380.0 L | 190.2 qt · 180.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 8630 sources
- Source: Traktorenlexikon, “Ford 8630”
Landini 14.500 (DT) "TL 24 N/G" sources
- Source: Traktorenlexikon, “Landini 14500”
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”